Selector Knob with Clip

PartSelect Number PS271094

This white knob accepts a D-shaped shaft. Sold individually.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will not start.
  • Timer will not advance.
  • Unusual Noise.
  • Compare At

    $8.78
  • You Save

    $1.46
  • Your Price

    $7.32
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

KNOB & CLIP ASM - WH1X2721

Part Number 9863549

$5.96
Special Order

Selector Knob

Part Number 266905

This knob accepts a D-shaped shaft.

$8.17
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 55 reviews What's this?
46-55 of 55
 

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBarney from Boca Raton FL

Broken knob

Worked Perfectly

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDelta from Angleton TX

The old knob was cracked

Just put the new knob on the machine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

Customerraymond from grants NM

The knob and start switch was broke off

i took the front of the dryer control panel off. then the switch is right there, the way its made all you have to do is unplug the wires and the switch is made to just turn it to the right and it comes right out. then do the same to put back in reverse. real easy with the partselect parts. they work will good.
Thanks James

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLinda B from Ogden UT

Dryer knobs were cracked and would not turn.

Before I bought the new knobs, I put nail glue inside each knob to strengthen the knobs. It lasted for about 6 mos and I would have to do it again. Needless to say I got tired of the broken knobs, so I bought new ones.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJane from Warwick RI

Broken knob

Once I found your web page things went very smoothly and quickly. It was exactly what I wanted and it even came a day early. Obviously, no problem with the repair just put the knob in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerThomas from Mechanicsburg PA

Knob broke.

Installed new knob. No tools required.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDanielle from Chatham MA

Dry would not work, knobs were stripped and did not turn properly.

Yes, we should have done this a long time ago and put off replacing the starter knob and heat adjuster knob. By the time they no longer worked, we called in an expensive repairman. When we realized what the problem was, we thanked him, paid him lots of money and did what we should have all along - replaced the knobs throug partsselect.com instead of using the repairman for another $150.00.

We received the knobs within 3 days (paying for medium fast delivery was worth it) and simply pulled the old problem knobs off and put the other ones on. Simple, no brainer work.

Save yourself expensive repairs and replace those knobs when they start going. Also, when you test the machine, make sure you turn the setting to a time (stupid mistake that most of us do) to make sure that the knobs work properly.

Good luck. A terrific experience with Partselect.com. Would use again in the future and recommend to others.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerkaren from scottsdale AZ

Knob broken

The knob had broken off a few months ago. I didn't think to look for one on the internet. I finally googled the brand name and part number and your company came up. It had the picture of the part which I ordered immediately. It came in the mail really quickly. I was so excited when I received the knob. I took it out of the package and slipped it over the stem in less than a minute. It went on perfectly. Now I no longer need to use pliers to turn on the dryer. It looks great and I am no longer inconvenienced. I love the new knob and would do business with this company again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerCarlos from Union NJ

Damage drum bearing destroying clothes.

I followed the instructions that the other folks wrote and it was so simple and easy to do. the video links that i received with my bill were also helpfull.

Help other customers find the most helpful instructions.

Were these instructions helpful?

22 of 668 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGary from Sherman TX

Timer knob missing

Installed new timer knob on timer shaft and it worked as expected.

Help other customers find the most helpful instructions.

Were these instructions helpful?

46-55 of 55