271094-1-M-GE-WH1X2721-Selector-Knob-with-Clip.jpg
271094-1-S-GE-WH1X2721-Selector-Knob-with-Clip.jpg 271094-2-S-GE-WH1X2721-Selector-Knob-with-Clip.jpg 271094-3-S-GE-WH1X2721-Selector-Knob-with-Clip.jpg

Selector Knob with Clip

PartSelect Number PS271094

This white knob accepts a D-shaped shaft. Sold individually.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will not start.
  • Timer will not advance.
  • Unusual Noise.
  • Compare At

    $8.78
  • You Save

    $1.46
  • Your Price

    $7.32
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Selector Knob

Part Number 266905

This knob accepts a D-shaped shaft.

$7.89
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 59 reviews What's this?
 

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDavid from N.Fairfield OH

Broken knobs and door handle

replaced them

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set, Wrench set

CustomerAlice from Mitchellville MD

Broken rotary switch and knob

Unplug dryer from electrical outlet
unscrew 4 screws back off dryer panel
unscrew 2 screws each off sides that hold panel
had to get a wrench set to unscrew rotary start switch from front panel because the two sides would not come off. tilt front panel and unscrewed rotary switch with wrench. Insert and screwed in rotary switch. Place on new knob. Plugged dryer in electical outlet and tested parts. Everything worked. Place screws back in sides and back panel. Done Very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerPatrick from San Antonio TX

Tub dampening straps needed for repair

Check on internet on how to use a putty knife to remove the front panel (slip it into the crack between the top lid and front panel). Then you can see the straps that are broke, figure out which screws to remove to gently lift the top lid to get at the pieces holding the straps in. Pretty simple, just remember to unplug the machine before starting.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRoy W from Albany OR

On knob was broken

Removed knob and installed the replacement.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJulie from Portland OR

Bdryer broken knob

I just put the new knob where the old one was and presto it was done. The whole process was much easier than I expected.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJoanne from LaQuinta CA

My husband broke the start knob, because he didn't know that you have to select the time and fabric selection first

Ordered a new knob and replaced the broken one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJanis from northridge CA

Knob broke

Easy. Pulled off old one slipped on new one!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customeral from Cathedral City CA

Start knob replacement

plug new knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Socket set

CustomerLISA from LOUISVILLE KY

Rotary start switch stem broke off

I simply removed the back of the dryer top and disconnected the old start switch and connected the new part. It honestly took me longer to take out the screws to remove the back plate than it did to replace the rotary start switch. It was very easy and I had a lot of confidence due to watching the Partselect instructional video on YouTube. The Partselect Customer Service woman was great too!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBarbara from Hawley PA

Knob pastic insides broke

pulled off the old knob and replaced it with the new knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSarah from Roswell GA

Stripped knob on dryer

ordered replacement. received in two days and voila! Fixed!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 7 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerJOHN from CLIFTON PARK NY

Timer and igniter out.

Fixed both issues. Go to http://www.do-it-yourself-washing-machine-and-dryer-repair-help.com/ The videos were all the help and information I needed, no log-in is necessary, and it was super helpful to me, found everything I needed. Was hesitant to remove the drum to get to the igniter but the videos show everything and are well done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDebra from Austin TX

Broken "start" knob

The start knob had crack in it that was getting bigger, and we'd begun using pliers to start it. Not only was it unwieldy but I thought it would eventually strip the metal stem. Of course this was a breeze of a repair--we just slid the new knob on. But my husband had been certain that finding a replacement knob--or calling a dealing and ordering the part--would be a big deal. I said: "But let's just try on-line." We quickly found the model # inside the dryer door. We filled in the appliance info, the part popped up. I ordered it. It arrived in 2 days. It's like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Selector Knob with Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerStephen from St. Simons Island GA

Dryer on/off knob broken

The pictures really made it possible to determine exactly which knob was what I needed for my dryer. Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJames from Antelope CA

Handle got broken off 7 years ago and just 3 months ago the start knob cracked in half

I got tired of every one complaning and using one of the knobs from the stove to start the dryer, I found this site and the parts and there you go.

Help other customers find the most helpful instructions.

Were these instructions helpful?