Quick Question!

Have you ever purchased from PartSelect.com before?

270835-1-S-GE-WH1X2117          -Timer Knob Clip
270835-1-S-GE-WH1X2117          -Timer Knob Clip http://www.partselect.com/Schematics/GE/00122776i01.gif

Timer Knob Clip

PartSelect Number PS270835

The timer knob clip on your washing machine connects the timer knob to the control panel. If your timer knob is damaged or will not stay in place, you may need to replace the clip. If the timer does not advance or the washing machine will not start, this may also be a symptom of a damaged timer knob clip. This part is clear plastic and is about 1 inch in size. Many of our customers have rated this repair as easy, and the only tools you may require are a set of needle-nose pliers. This is an OEM part sourced directly from the manufacturer.

This part works with the following brands: General Electric, Hotpoint.

This part works with the following products: Washer.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will Not Start.

Compare At

$4.20

You Save

$.70

Your Price

$3.50
Order within the next 11 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 21 reviews What's this?
16-21 of 21
 

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: CANDACE from AUSTIN, TX

Teeth on the dial with ring broke/stripped

Used a bent paper clip to hook/remove the old plastic Timer Knob Clip, pulled off Control Knob and Dial. The dial was ok but was afraid it may have been stripped also.I then replaced them and used needle nose pliers to replace Timer Knob Clip. I always order extra clips because they are cheap and have learned a long time ago nothing ALWAYS goes perfectly and it was cheap plastic and sure as you know what I would have broken it and had to order another. Now I have a spare!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Marie from Deltaville, VA

The control knob teeth broke-could not move it easily

we took off the old control knob-pulls off-then replaced the plastic clip and popped it back on-now the teeth can move the knob to start the washer

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
  • Timer Knob Clip
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Karla from Boothbay Harbor, ME

Handle plate would'nt turn

Pulled off the handle with the kneedle nose pliers replaced the plastic piece in that, then pulled off the plate that turns the machine on and just snapped the new one on. Only took seconds and saved alot of money. Considering just to have a repair man come to see what was wrong would have cost me $88.00.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Lou from Pittsburgh, PA

Broken knob

pull of old knob and ring. pull on the new one, it took about two minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Thomas from Baltimore, MD

Knob asm control/ bushing hing

First remove clip with srewdriver and pulled the knob off, then replace with new knob and replaced the clip, the next thing I removed two screws with a philps screwdriver and remove the the bracket then I slip the bushing on the bracket took a little while to figure how to replace it in the process of replacing the two screws I broke the bracket which I will order later, the only real problem I had was I did not have to order the timer knob clip because it came with the knob the picture did not imform me that it was there other then that it was easy

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: JAMES from KIRKLAND, WA

Washer timer stopped working & broken timer knob

Unplugged washing machine from wall. Removed screws from top of control panel and lifted it forward. Removed knobs. Unplugged timer. Unscrewed bolts holding timer and lifted the old timer out. Inserted the new timer in the slots and tightened the bolts. Plugged the timer in. Lift the control panel back into place and replaced screws on top. Replaced knobs. The White Timer Knob came with a clip in the same bag and did not have to be purchased seperately. Now I have an extra clip in case this breaks but I would not have bought the clip if the description for the timer knob said that a clip was included.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-21 of 21