270835-1-M-GE-WH1X2117-Timer-Knob-Clip.jpg
270835-1-S-GE-WH1X2117-Timer-Knob-Clip.jpg

Timer Knob Clip

PartSelect Number PS270835

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will not start.
  • Compare At

    $3.92
  • You Save

    $.65
  • Your Price

    $3.27
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 19 reviews What's this?
16-19 of 19
 

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerSusan from Keyport NJ

Spinning control knob

I watched the video, used a needle nosed pliers to pull the clip off the knob and just pushed the new knob and clip on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerMarie from Deltaville VA

The control knob teeth broke-could not move it easily

we took off the old control knob-pulls off-then replaced the plastic clip and popped it back on-now the teeth can move the knob to start the washer

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJAMES from Boca Raton FL

Timer knob defective

After viewing the brief video supplied by you,it was a simple five minute fix.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 6 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerJAMES from KIRKLAND WA

Washer timer stopped working & broken timer knob

Unplugged washing machine from wall. Removed screws from top of control panel and lifted it forward. Removed knobs. Unplugged timer. Unscrewed bolts holding timer and lifted the old timer out. Inserted the new timer in the slots and tightened the bolts. Plugged the timer in. Lift the control panel back into place and replaced screws on top. Replaced knobs. The White Timer Knob came with a clip in the same bag and did not have to be purchased seperately. Now I have an extra clip in case this breaks but I would not have bought the clip if the description for the timer knob said that a clip was included.

Help other customers find the most helpful instructions.

Were these instructions helpful?

16-19 of 19