270806-1-M-GE-WH1X2036-Hose-Clamp-Kit.jpg
270806-1-S-GE-WH1X2036-Hose-Clamp-Kit.jpg 270806-2-S-GE-WH1X2036-Hose-Clamp-Kit.jpg

Hose Clamp Kit

PartSelect Number PS270806

This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Leaking water.
  • Compare At

    $8.46
  • You Save

    $1.41
  • Your Price

    $7.05
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 1 reviews What's this?
1-1 of 1
 

3 of 4 people found this instruction helpful

Parts Used

  • PUMP
  • Hose Clamp Kit

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers, Socket set

CustomerRichard from Garden City NY

Washer had heavy wet clothes left after spin cycle

The trick is to pull the front cover off by using a putty knife .slide it under the cover at both front corners.it will click on each corner.then pull front cover off .lift off the bottom catch hooks.look for the pump on the bottom right side.unplug the wite connector .take 2-5/16 bolts out holding the bracket.then grab a pliers .squeeze the hose clamps and pull the 2 hoses off.assemble new pump.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1