270536-1-S-GE-WH16X543          -Suspension Rod and Spring
270536-1-S-GE-WH16X543          -Suspension Rod and Spring

Suspension Rod and Spring

PartSelect Number PS270536

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Noisy.
  • Shakes and moves.
  • Compare At

    $24.47
  • You Save

    $4.08
  • Your Price

    $20.39
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 2 reviews What's this?
1-2 of 2
 

16 of 17 people found this instruction helpful

Parts Used

  • Suspension Rod and Spring

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set

CustomerKevin from Hazelwood MO

A small metal washer came off putting the machines weight on a plastic piece that shattered

first use a puddy knife to remove the front cover – slide the puddy knife in the front upper left than right corners where the top meets the front of your washer they are push in clips that hold the front cover (they are not easy to damage)
second pull the front out than up of the bottom clips, there is the rods with a tube assembly is either black or yellow that hold the tub up
remove the 2 screws holding the top they are near the clips you used the puddy knife on
lift the lid about 4 inches and you will see how it works, at that point with the replacement part in hand it is self obvious what to do replace the rod.
When done try the washer and if it works, if so put the covers back on.
The shock of it all is watching the natural violence your machine goes through just to wash your clothes

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 11 people found this instruction helpful

Parts Used

  • Suspension Rod and Spring

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

Customerdouglas from Stockton CA

Tub fell down on one side

after ordering part and getting the wrong part sent to me i was able to finally get right part to my house 2 weeks later, i pulled front cover off with a screwdriver took out broke rod and inserted new part closed cover and hooked power back on and was in business

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2