8 of 13 people found this instruction helpful
Level of DifficultyReally Easy
Time to do repair:Less than 15 mins
ToolsPliers, Screw drivers
CustomerWilton from Sun City West, AZ
The cornor broke off the housing assembly and instead of rigging up a stablizer, I simply took the part number and ordered a new one.
I too the front knob off the timer, took the screws out of the top of the panel, unpluged the timer and plugged the new timer in, removed the old timer one screw and pulled the old one out, reversing the process to get the new timer mounted, replaced the panel, replaced the timer knob and finished the job in about ten min.
It is not rocket science, well I confess, I once worked on rockets and their components, so it was real easy for me.
3 of 7 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Pliers, Screw drivers
CustomerMichael from Virginia Beach, VA
Dryer automatic timer setting not working
Replaced both the timer and resistor,