269907-1-S-GE-WH12X10176        -Washer Control Board
269907-1-S-GE-WH12X10176        -Washer Control Board

Washer Control Board

PartSelect Number PS269907

This board has 4 shafts and 9 led lights. Some models might not have to use the switch to the far right on the board.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $221.42
  • You Save

    $36.90
  • Your Price

    $184.52
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 4 reviews What's this?
1-4 of 4
 

3 of 5 people found this instruction helpful

Parts Used

  • Washer Control Board

Level of DifficultyVery Difficult

Time to do repair:More than 2 hours

ToolsNutdriver

CustomerDonald from Sebring FL

Washer would not wash or spin

I replaced the circuit board which did not solve the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Washer Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerBonnie from Leesburg FL

On button stop working

After taking the top panel apart and determining that the 'Start' function couldn't be bypassed and the entire control panel needed to be replaced. Googled the washer model number and found this website. Delivery was quick and communication was great. Received the part and installed it, however it still did not start. Once again to the wed and asked the question, why. Turned out there is a jumper I needed to take off the old panel and put on the new. It tells the panel which washer it is now on. Works fine, a learning experience

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Washer Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerFred D from Purcellville VA

Start button was failing to start the washing machine

First I removed the three torx screws holding the control panel in place. Once the electrical connections were accessible, I removed the electrical connections (2) and one small water hose from the control panel. Next, at my workbench, I removed the control assembly from the panel (three or four nutdriver type screws, and pried off the control knobs with a small screwdriver). I then removed the model selector electrical connector from that old control assembly and installed it onto the new. Next, I installed the control assembly onto the panel, replaced the control knobs, reconnected the electrical connectors and hose, and reinstalled the control panel. Tested machine, and it was working perfectly. Thanks again!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

  • Washer Control Board

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerDavid from Virginia Beach VA

Power surge destroyed control assembly.

Removed the burnt control assembly and replaced it with the new part. Works perfectly now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4