Washer Control Assembly

PartSelect Number PS269899

This part is located behind the control panel. It controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences. Reuse the jumper wire from old board.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will Not Start.
  • Compare At

  • You Save

  • Your Price

In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 1 reviews What's this?
1-1 of 1

21 of 27 people found this instruction helpful

Parts Used

  • Washer Control Assembly

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerJOHN from McKINNEY TX

Start/pause would not engage

removed four 1/4" screw nuts from top of control panel,removed the control knobs (3), tilted control panel forward towards me,unscrewed (six) 1/4" screw nuts.Then removed the phillip screws that secure the P.C. Board, I formed plastic plunger on the control board was engaging the the button on the P.C. Board, I made adjustment and reassembled control panel, It has been working so I had returned the part that I had ordered

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1