1 of 3 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Pliers, Screw drivers, Socket set
CustomerGLEN from NORWICH CT
Washer wouldnt run right
REMOVED THE TIMER NOBS ON FRONT AND THE SMALLER NOB WAS BROKEN , TOOK THE BACK OFF THE CONTROL PANEL REMOVED SCREWS DISCONNECTED WIRING HARNESS PULLED OUT TIMMER . REPLACED THOSE PARTS , THE DRAIN HOSE ON THE BACK TOOK THE 2 SCREWS OUT PULED THE OLD HOSE OUT AND INSTALLED NEW ONE THE WASHER RUNS PERFECT THANK YOU MUCH GLEN HASKELL
1 of 4 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerThomas from Crossville TN
Washer would not shut down in rinse cycle.
Removed 4 screws from top of washer panel.
Removed plastic locking pin on control knob. Removed control knob. Removed one screw that holds timer in place.
Reversed what I did to reassemble .