268451-1-S-GE-WH01X10061        -Knob and Clip
268451-1-S-GE-WH01X10061        -Knob and Clip 268451-2-S-GE-WH01X10061        -Knob and Clip 268451-3-S-GE-WH01X10061        -Knob and Clip http://www.partselect.com/Schematics/GE/00111374i01.gif

Knob and Clip

PartSelect Number PS268451

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will Not Start.
  • Compare At

    $9.46
  • You Save

    $1.58
  • Your Price

    $7.88
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Knob Dial

Part Number 756514

$19.34
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 17 reviews What's this?
 

10 of 16 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Kelly from Lewiston, ID

The edge of the knob wore out

I pulled the old knob off and put the new one on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers
Customer: William from Cornelia, GA

Timer would not advance.

Removed the four torx screws on top of backsplash, unplugged timer, removed the one holding screw, slid timer back and removed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used:
  • Knob and Clip
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: Stewart from Richmond, KY

Knob wouldn't advance timer

Used this site to find probable problem - stripped teeth on knob - and how to get old knob off using needle nosed pliers to remove clip. So also ordered replacement knob from this site - got it in one day! Took about 2 minutes to put replacement knob on. Most of repair time was figuring out what the problem was.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used:
  • Knob and Clip
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Karen from Canastota, NY

The knob on my washer would not turn so I could select load size

I removed the old knob (very easy, used a flathead screwdriver to remove the clip and off it came). Put the new knob and clip on and voila!!!! It worked. My local appliance people wanted over $100.00 for the same part. Definately using Parts Select if issues arise in the future.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used:
  • Knob and Clip
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: michele from Deerfield Beach, FL

Washer needed new knob and clip

simply pulled the old one off with the broken clip and pushed the new one on. This is the third or fourth time we have used Parts Select and have always gotten the best service and best price.

Help other customers find the most helpful instructions.

Were these instructions helpful?