268450-1-S-GE-WH01X10060        -Knob and Clip
268450-1-S-GE-WH01X10060        -Knob and Clip 268450-2-S-GE-WH01X10060        -Knob and Clip 268450-3-S-GE-WH01X10060        -Knob and Clip

Knob and Clip

PartSelect Number PS268450

This knob accepts a D-shaped shaft.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will not start.
  • Timer will not advance.
  • Compare At

    $10.69
  • You Save

    $1.78
  • Your Price

    $8.91
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 4 reviews What's this?
1-4 of 4
 

13 of 19 people found this instruction helpful

Parts Used

  • Knob and Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRay from South Pasadena FL

Broken knobs

Actually putting on a knob is self-explanatory. But wanted to say your company had the best price and reaction (delivery time). Great job by PartSelect!

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 8 people found this instruction helpful

Parts Used

  • Knob and Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDennis from Lindon UT

Knob broke

Uhhhhhh.... Pulled knob off. Pushed new knob on. Took all of 5 seconds.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 10 people found this instruction helpful

Parts Used

  • Knob and Clip

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRUSSELL from NORWALK CT

The old knob broke.

I REPLACED THE OLD KNOB WITH A NEW ONE.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers, Screw drivers

Customerrichard from shreveport LA

Knob on washer timer would not turn dial also dryer start switch would not work.

Washer - remove 4 screws (phillips)on the back of the panel, slide it sidways slightly and pull forward to release. remove clip behind knob ( kinda like the clip on old car window handles) remove knob and dial. remove 1 nut on timer, rotate timer to release. installation is just as easy, but put clip onto knob first then just push onto dial shaft, it will click when on correct.

Dryer - remove 4 screws (phillips) on back of panel and remove same as washer. dryer switch will have a little cam lock on it just pull it off the plastic retainer and rotate switch. Remove wires one at a time and put on new switch so as not to wire wrong. reverse for re-assembly

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4