Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS268450
This knob accepts a D-shaped shaft.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Actually putting on a knob is self-explanatory. But wanted to say your company had the best price and reaction (delivery time). Great job by PartSelect!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Uhhhhhh.... Pulled knob off. Pushed new knob on. Took all of 5 seconds.
I replaced the old knob with a new one.
Washer - remove 4 screws (phillips)on the back of the panel, slide it sidways slightly and pull forward to release. remove clip behind knob ( kinda like the clip on old car window handles) remove knob and dial. remove 1 nut on timer, rotate timer to release. installation is just as easy, but put clip onto knob first then just push onto dial shaft, it will click when on correct.Dryer - remove 4 screws (phillips) on back of panel and remove same as washer. dryer switch will have a little cam lock on it just pull it off the plastic retainer and rotate switch. Remove wires one at a time and put on new switch so as not to wire wrong. reverse for re-assembly
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.