Timer

PartSelect Number PS268268

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $185.64
  • You Save

    $30.94
  • Your Price

    $154.70
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

4 of 6 people found this instruction helpful

Parts Used

  • Timer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerKJ from Oakdale NY

Defective timer on an electric clothing dryer

It took longer to find the part online than it did to replace it. 6 removed screws w/ a nut driver, 3 electrical quick disconnect plugs and swapping the knob from the old timer. Total time to repair this part myself, under 6 minutes.

The reason I needed to swap the part out was that the dryer would turn on, but the timer portion was broken and the timer would no longer count down and turn off on its own.

I'm very happy with the price and speed of shipping by Parts Select. They were about $55 dollars cheaper than some of their online competitors for this part and the part arrived within two days.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Timer

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Socket set, Wrench set

CustomerJoseph from Binghamton NY

Dryer did not dry clothes due to no heat

First removed the power from the dryer for safety. Removed the back of panel. After testing to see if there was continuity in the heating element and replacing all the thermostats in a previous repair. The switch was the next thing to replace. Removed several screws holding the switch in place then disconnected the cables one at a time and placed onto the new switch. The cables plugs are also unique in the desgin which would enable a person not to mess up if all the wire detached at one time. Then reattached the switch back into the dryer, then attached the back panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2