268250-1-M-GE-WE4X813 -Thermostat
Part Location Diagram of WE4X813 GE Thermostat
See part 506 in the diagram
( Grid squares measure 1x1 inch )
268250-1-S-GE-WE4X813 -Thermostat 268250-2-S-GE-WE4X813 -Thermostat 268250-3-S-GE-WE4X813 -Thermostat Part Location Diagram of WE4X813 GE Thermostat
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Thermostat WE4X813

Rated by 2 customers 

Easy 

More than 2 hours 

Ratings submitted by customers like you who bought this part.

$ 35.56
  On Order
Get FREE EconoShip on orders over $100! T&C apply
PartSelect Number PS268250
Manufacturer Part Number WE4X813
Manufactured by GE
Product Description

Thermostat Specifications

This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 230 degrees Fahrenheit. The element will kick back in when the temperature drops to 200 degrees Fahrenheit - the differential of 30 degrees.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint.
Part# WE4X813 replaces these:
AP2042846, 276895, WE04X0813
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.3 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No Heat--dryer runs--Timer/Heat Selector does not advance
Ok so it finally died. Breakdown is relatively easy. UNPLUG the dryer before doing anything else. Remove the dryer vent plastic hose from the dryer--replace if torn. Remove the screws from the back plate covering the switches. Go to the front of the dryer--open door and locate 2 screws at about 11 and 12 o'clock. After removing these 2 screws you should be able to lift the top off the dryer. Take note of the wiring connections--I took a picture of the wiring from my cellphone just in case. Go behind the dryer and locate the access to the electric motor to remove the belt that spins the drum. There is a wheel/belt tensioner--remove the tension from the belt. You are now ready to lift the drum out. While you have this drum out, now is a good time to vacuum all the lint out. Once the drum is out, you'll see the heating element. If the wiring element is broke, just replace the wiring kit not the entire assemby (save $100). While you're at it replace the high limit and safety thermostats (about $28 for both) very easy to replace--unscrew and just replug the wires back to the original terminal locations. To replace the Timer/heat selector, remove a screw that holds the assembly and plug the wires back per your diagram or better if you took a picture from your cellphone. Assemble in reverse direction. Good luck!
Read less
Other Parts Used:
Thermostat High Limit Thermostat
  • Jose from Dalzell, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
20 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Intermittent then no heat
First guess is one of the thermostats. Used ohm meter to test all 5 thermostats. All looked good. (first clue) Bypassed all thermostats, dryer worked. Ordered thermostats. (a couple at a time) Replaced thermostats. Dryer did not work. Tested heating element. Looked good. (Second Clue) Replaced heating element. Still no go! Dryer started working then stopped. Very confused. Ordered timer. Replaced timer. Everything great! Works like a new one. Moral to this story, trust your meter! Should have been a very easy repair. Replaced belt while dryer apart.
Read less
Other Parts Used:
Thermostat Timer High Limit Thermostat Drive Belt
  • George from Lebanon, TN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers
39 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
August 28, 2017
How do I access the heater in the dryer. Can't get to it
For model number DCLR333ET1WW
PartSelect logo
Hi Gary, Thank you for your inquiry. A previous customer wrote in explaining how to get to your element: "I had to remove the top of the dryer. 2 Phillips screws at top in the door opening. flip top out of way take 2 screws out of inside that hold the front on. Unhook all plugs and remove front of dryer. once u have did this you need to remove the drum by pulling it out of the bearing in the back unhook the belt from the motor and remove the drum this should expose the element 4 screws and 3 wire to remove it. installation is the same." I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Heating Element Coil with Housing - 240V
$247.87
$247.87
  In Stock
High Limit Thermostat
$32.09
$32.09
  In Stock
Thermostat - Limit: 325
$65.53
$65.53
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS268250
Manufacturer Part Number: WE4X813
Brand
Model Number
Description
General Electric
BJLR473ET0WW
Dryer - Electric
General Electric
BJLR473EV0WW
Dryer - Electric
General Electric
BLLR113ET0WB
Dryer - Electric
General Electric
BVLR333ET0WW
Dryer - Electric
General Electric
BVLR333EV0WW
Dryer - Electric
General Electric
DBLR333ET0AA
Dryer - Electric
General Electric
DBLR333ET0WW
Dryer - Electric
General Electric
DBLR333ET1AA
Dryer - Electric
General Electric
DBLR333ET1WW
Dryer - Electric
General Electric
DBLR333T0WW
Dryer - ELECTRIC DRYER
General Electric
DBLR453ET0AA
Dryer - Electric
General Electric
DBLR453ET0WW
Dryer - Electric
General Electric
DBLR453ET1AA
Dryer - Electric
General Electric
DBLR453ET1WW
Dryer - Electric
General Electric
DCCB330ET0AC
Dryer - Electric
General Electric
DCCB330ET0WC
Dryer - Electric
General Electric
DCCB330EV0AC
Dryer - Electric
General Electric
DCCB330EV0WC
Dryer - Electric
General Electric
DCLR333ET0AA
Dryer - Electric
General Electric
DCLR333ET0WW
Dryer - Electric
General Electric
DCLR333ET1AA
Dryer - Electric
General Electric
DCLR333ET1WW
Dryer - Electric
General Electric
DCLR333EV0WW
Dryer - Electric
General Electric
DDC5000SBLAD
Dryer - Electric
General Electric
DDC5000SBLWH
Dryer - Electric
General Electric
DDC5000SCLAD
Dryer - Electric
General Electric
DDC5000SCLWH
Dryer - Electric
General Electric
DDC5000SDLAD
Dryer - Electric
General Electric
DDC5000SDLWH
Dryer - Electric
General Electric
DDC5400SBLAD
Dryer - Electric
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Thermostat
$ 35.56
  On Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.