Timer - 60Hz

PartSelect Number PS268241

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $145.56
  • You Save

    $24.26
  • Your Price

    $121.30
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

2 of 4 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerMark from Culver City CA

The timer was intermittent and not connecting to ignitor

I pulled the dryer away from the wall unplugged it.
I removed the small back panel just behind the timer switch ( 5 screws for 1/4" nut driver)
The switch has one screw (1/4"nut driver ). Remove it and the timer switch comes away. Disconnect the two electrical connections.(impossible to screw this part up). Reconnect the the new switch to the couplings from the old switch. This part really is idiot proof. There's only one way.
The knife is to pry off the plastic dial from the stem of the old timer. Dial was on tight and the broad blade on the butter knife helped from breaking the plastic dial. Everything goes back together the way it came apart. Blissfully simple. I hope that helps. I felt like a real genius when I was done. Good job Partselect! I have 10 cats.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerWilliam from Holmes Beach FL

Replaced timer and belt

Removed back panel and old timer. Matched wires from old timer to new and installed new timer. Very easy and went smoothly. Having the Exact replacement timer was the essence of the task, thanks to the easy of buying from PartSelect.

The belt replacement was a little more difficult. Finally finding how to guide the belt Behind the felt busing in the front of the dryer helped. Then it took some cuts on the upper arm to guide the belt around the motor and tension pulleys properly. Be sure that the belt has the Rough side ON the drum and doesn't get turned anywhere in it's path.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2