267949-1-S-GE-WE4M216           -Bias Thermostat
267949-1-S-GE-WE4M216           -Bias Thermostat 267949-2-S-GE-WE4M216           -Bias Thermostat

Bias Thermostat

PartSelect Number PS267949

This thermostat is located on the blower wheel.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Compare At

    $68.16
  • You Save

    $11.36
  • Your Price

    $56.80
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 2 reviews What's this?
1-2 of 2
 

15 of 23 people found this instruction helpful

Parts Used

  • Bias Thermostat

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerStephen from Mechanicsville VA

Dryer was cutting off completely.

The problem was intermittent. It only happened when the unit was first started. After it was restarted it usually worked until the load was dry. I looked at the schematics and saw that only the hi-temp therostat and the motor overload could stop the dryer completely. I put my volt meter on the hi-temp thermostat and ran the dryer. When the dryer stopped I realized the hi-temp therm. was tripping. I read the web site help for this symptom and the suggestion was the bias therm.
I replaced it and the unit worked.

Help other customers find the most helpful instructions.

Were these instructions helpful?

14 of 24 people found this instruction helpful

Parts Used

  • Bias Thermostat

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerHeidi from Newfield NJ

Dryer wouldn't heat up

I wanted to fix the cheapest possible problem first which was the thermostat.

Got the dryer apart and it was the wrong thermostat for the dryer, which was good news! I looked in inside floor of the dryer cabinet and saw alot of tiny "springs". Couldn't figure how they got there.

Turned out they were coils from the heating element. Must have burnt out and fell free from the element. So I ordered that and replaced it.

I want to say that I'm in NJ and I ordered that thermostat and got it in ONE DAY! Thought that was too good to be true but when I ordered the heating element THAT CAME IN ONE DAY!

I don't know what kind of people work in the shipping department but they are awesome! You really made the difference on this job.

So did the info on your website. I've never even seen a dryer apart before. It was a piece of cake thanks to you guys. You just saved me about $500.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2