Quick Question!

Have you ever purchased from PartSelect.com before?

267091-1-S-GE-WE1X980           -D-Shaped Knob Insert Clip
267091-1-S-GE-WE1X980           -D-Shaped Knob Insert Clip 267091-2-S-GE-WE1X980           -D-Shaped Knob Insert Clip http://www.partselect.com/Schematics/GE/00005070i01.gif

D-Shaped Knob Insert Clip

Compare At

$5.47

You Save

$.91

Your Price

$4.56
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS267091
Manufacturer Part Number WE1X980
Manufactured by GE

This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start or shut off, the timer will not advance, or the dryer shuts off too soon, the issue may be the control knob itself. This part is sold individually. Although this part fits with some different brands, be sure to check the list of brands below to make sure it fits with your dryer unit. Refer to the manual provided by the manufacturer for further installation instructions.

This part works with the following brands: General Electric, Hotpoint, Kenmore.

This part works with the following products: Dryer, Washer, Dishwasher.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will Not Start.
  • Will not shut off.
  • Shuts off too soon.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

The control knob on my dryer will move around the different controls but will not stay in place when I choose one. Does this usually mean I need a new knob or the piece inside the knob or both?

Bobbi
Answer:

Hi Bobbi, if the knob WE01X20374 is damaged then it needs to be replaced. If it is just the insert WE1X980 that is missing/damaged that can be replaced by itself. Best of luck with this repair.  

5 people found this helpful.

Most Recent

Question:

I broke the insert underneath my selector knob and although the knob is fine I need a new insert. How can I take the knob off without breaking it to make this installation?

Shawna
Answer:

Hi Shawna, the knob can be removed by using a bent paper clip to reach behind the knob and pull the U-clip out. Then the knob can pop off. Once the knob is off, the insert can be removed the same way, or by using a small screwdriver. Please let us know if you have any further questions. 

4 people found this helpful.
Question:

What is the point of the insert inside the knob? Ive had my dryer over ten years and these are the original knobs and just recently theres been visable damage to the knob so I checked underneith and the insert is damaged and not all there. Will my knob work without this piece or do I need to replace it

Sheldon
Answer:

Hi Sheldon, the insert is needed to keep the knob secure on the shaft of the switch. If the insert is damaged, the knob will need replacing. I hope this helps!

2 people found this helpful.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 21 reviews What's this?
16-21 of 21
 

3 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ralph from Lakeland, FL

Part was broken

Snapped the parts right on. Fast service and easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: David from N.Fairfield, OH

Broken knobs and door handle

replaced them

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • D-Shaped Knob Insert Clip
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Lynn from MORGANTOWN, WV

The timer knob was cracked and the metal "d"-ring was broken on my ge cloths dryer

This repair was a no brainer repair. The factory replacement knob that I bought from this site comes with a new "D"-Ring. Some other aftermarket parts houses sell the knob and the "D"-Ring as seperate parts. The knob from this site already has the "D"-Ring ring installed in the knob. My "D"-ring was broken and I simply removed it with my fingers. All I had to do was properly align the new know knob with the timer shaft and press it into place. If your "D"-ring is not broken and not still inside the old knob, you will need to pull it off the shaft with a pair of pliers before pressing the new knob onto the timer shaft. Dr. "B" The Hot Rod Doc

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Donna from WYCKOFF, NJ

Timer knob was cracked on the inside.

I just pulled off the old knob and put on the new one. Took 10 seconds. I did not need the D-Shaped knob insert clip after all.so glad i found this website.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Steven from KANSAS CITY, MO

Timer knob broke

Repair was extremely easy. Really appreciated the "How To" video! Great Job, ......

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: Mary Jane from BAKERSFIELD, CA

Knobs break

This is the first time I have bought a replacement knob, I have used the others from the other modes, Truly a bad GE product, glad I had a son n law with know how. and did not have to call a repairman for a simple fix. Would not turn on the dryer due to a bad knob

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-21 of 21

Model Cross Reference

This part works with the following models:

PartSelect Number: PS267091
Manufacturer Part Number: WE1X980
Brand Model Number Description
Kenmore363DDE8109VMLDryer
Kenmore363DDE8200GALDryer
Kenmore363DDE8509RCMAADryer
Kenmore363DDE8509RCMWWDryer
Kenmore363DDE9200GALDryer
Kenmore363DDE9600RCMAADryer
General ElectricBJLR473ET0WWDryer - Electric
General ElectricBJLR473EV0WWDryer - Electric
General ElectricBJLR473GT0WWDryer - Gas
General ElectricBJLR473GV0WWDryer - Gas
General ElectricBLLR113ET0WBDryer - Electric
General ElectricBVLR333ET0WWDryer - Electric
General ElectricBVLR333EV0WWDryer - Electric
General ElectricBVLR333GT0WWDryer - Gas
General ElectricBVLR333GV0WWDryer - Gas
General ElectricBWXR473ET0WWDryer - Electric
General ElectricBWXR473ET2WWDryer - Electric
General ElectricBWXR473ET3WWDryer - Electric
General ElectricBWXR473ET5AADryer - Electric
General ElectricBWXR473ET5WWDryer - Electric
General ElectricBWXR473EV0AADryer - Electric
General ElectricBWXR473EV0WWDryer - Electric
General ElectricBWXR473GT0WWDryer - Gas
General ElectricBWXR473GT2WWDryer - Gas
General ElectricBWXR473GT3WWDryer - Gas
General ElectricBWXR473GT5AADryer - Gas
General ElectricBWXR473GT5WWDryer - Gas
General ElectricDBB3300EA0AADryer - Electric
General ElectricDBB3300EA0WWDryer - Electric
General ElectricDBB3300EA1AADryer - Electric