266905-2-S-GE-WE1X1206          -Selector Knob
266905-2-S-GE-WE1X1206          -Selector Knob 266905-1-S-GE-WE1X1206          -Selector Knob 266905-3-S-GE-WE1X1206          -Selector Knob

Selector Knob

PartSelect Number PS266905

This knob accepts a D-shaped shaft.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will not start.
  • Compare At

    $9.80
  • You Save

    $1.63
  • Your Price

    $8.17
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 2 reviews What's this?
1-2 of 2
 

11 of 11 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerMichael from Summit Hill PA

Sqeaking noise from dryer drum

removed two screws front , pick up on top pull top back remove two screws from front panel lean back and install new slide were easily visible and easy to install..

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerElisabeth from Portland OR

Broken knob and broken knob stem

Using the diagram on this site, I determined which parts I needed to order. The exploded diagram was really helpful, since I normally don't spend much time thinking about how my washing machine is constructed, and we bought the dryer used, so I didn't have any diagrams or manuals for it. After detaching the backsplash from the cabinet, I pulled the wiring out of the old switch unit and popped them into the new unit. I put the screws back in the same place and then put the new knob on the stem. I couldn't believe how easy it was.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2