266269-1-S-GE-WE18X54           -Lint Filter with Frame
266269-1-S-GE-WE18X54           -Lint Filter with Frame 266269-2-S-GE-WE18X54           -Lint Filter with Frame 266269-3-S-GE-WE18X54           -Lint Filter with Frame http://www.partselect.com/Schematics/GE/GE_Thumb/00005070i03.gif

Lint Filter with Frame

PartSelect Number PS266269

This part may differ in appearance, but functions same as original.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Takes too long to dry.
  • No heat or not enough heat.
  • Compare At

    $51.58
  • You Save

    $8.60
  • Your Price

    $42.98
In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 21 reviews What's this?
1-5 of 21
 

26 of 29 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerJoAnn from St Petersburg, FL

My old filter had a broken frame and ragged screen

Replacing the filter only required removing the old one and replacing it with the new part which fit perfectly. I received the part two days after placing my order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 8 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerKatherine from Washaington, DC

Lint filter screen was broken

Remove old one, put the new one in!

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 13 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerFrank from Lakewood, CO

Dryer performed erratically. Timer stopped. Heat element would not come on.

Removed two torx screws from the control panel. Removed timer with socket wrench and disconnected socketed electricals. Everything went slick.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 5 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerNancy from Dalton, PA

My dryer was starting to throw a lot more heat than normal. I clean my lint filter every time I use the dryer. What I didn't realize was that over time, the lint filter had warped enough to allow lint to escape into the dryer and subsequently into the dryer vent system, clogging some areas almost

I opened the vent system (screwdrivers to loosen screws) and used the shopvac hose and my hands to clean out what I could. I also snaked the shopvac hose down into the dryer and removed clogged lint. Then I just replaced the lint filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customerfrankie from east windsor, NJ

Door handle was broken off and I needed a new lintfilter

door handle just snaps right in and the lintfilter is a no brainer. thank you very much partselect keep up the good work

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 21