Heating Element Coil with Housing - 240V

PartSelect Number PS265613

They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Compare At

    $156.90
  • You Save

    $26.15
  • Your Price

    $130.75
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Heater Coil Restring Kit

Part Number 265619

Use this restring coil kit from GE to replace the existing coil in your heating element. This replacement coil kit comes with two coils.

$25.34
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 1.8 / 5.0, 1 reviews What's this?
1-1 of 1
 

88 of 108 people found this instruction helpful

Parts Used

  • Heating Element Coil with Housing - 240V

Level of DifficultyVery Difficult

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)

CustomerJoshua from Cardington OH

No heat

had to remove top of dryer 2 phillops screws at top in the door opening. flip top out of way take 2 screws out of insides that hold the front on. un hook all plugs and remove front of dryer. once u have did this you need to remove the drum by pulling it out of the bearing in the back un hook the belt from the motor and remove the drum this should expose the element 4 screws and 3 wire to remove it. installation is the same

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1