Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS264402
Sold Individually. This knob takes a D-shaped shaft.
This part works with the following brands: GE, Hotpoint & Kenmore.
I simply pushed the new knobs on the posts. I am extremely pleased with PartSelect.com with the speedy delivery of the knobs after the order. Thank you. CW
Help other customers find the most helpful instructions.
Were these instructions helpful?
You guys are great. I was able to look up the model number and using the on-line manual, confirmed the part I needed. Then the ordering went quickly and the part arrived in three days. If only all other on-line shopping was so easy!
Never got around to replacing. Found your website...ordered part....arrived the next day...popped it on the dryer. Done. Easiest installation and solution ever. HIGHLY RECOMMEND this website.
Removed the damaged knob, simply by pulling it off the shaft, then replaced it with the new knob. Time required: 30 seconds. The majority of the time spent repairing the damage was locating at supplier that provided the ease of locating the part on their web site. Your company made that task very simple. I will use your organization again for parts replacement.
1. lift up the top of the dryer by releasing the 2 clips using a putty knife2. remove the 2 screws holding the front of the dryer to the cabinet3. Unplug the front panel wires4. lift off the front of the dryer5. remove the old glide and scrape off all old glue6. apply new glue, and put new glide in place. Hold with spring clamps for 30 minutes or so.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.