263918-1-S-GE-WD7X14            -Door Cable and Eyelet
263918-1-S-GE-WD7X14            -Door Cable and Eyelet 263918-2-S-GE-WD7X14            -Door Cable and Eyelet 263918-3-S-GE-WD7X14            -Door Cable and Eyelet http://www.partselect.com/Schematics/GE/GE_Thumb/00002537i02.gif

Door Cable and Eyelet

PartSelect Number PS263918

This part is sold individually. It is recommended that both sides are changed when replacing one.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Door latch failure.
  • Door won’t close.
  • Compare At

    $10.20
  • You Save

    $1.70
  • Your Price

    $8.50
In Stock
Order within the next 6 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

SPRING DR

Part Number 259712

Sold Individually

Order within the next 6 hrs and your part ships today!
$27.55
In Stock

Heavy Duty Door Spring

Part Number 259673

Used for dishwashers that have decorative wood panels. Sold Individually.

$42.29
No Longer Available

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 46 reviews What's this?
 

1 of 2 people found this instruction helpful

Parts Used

  • Door Cable and Eyelet

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerLlewellyn from Dalton, MA

Broken cable attached to spring

Similar to what others had described. Removed bottom panel to access cable and spring area to replace cable, but plastic pulley around which the cable rode had a broken flange for about 1/2" of the circumference. This was obviously the reason the cable had become frayed and broken. There was little point in simply replacaing the cable becasue the same thing was bound to happen. It needed a new pully and after checking several sources, none was available. I used a 1 3/8" snap ring and ground off both ends removing the ears so that slightly over one half of the ring was left. This allowed me to force the open portion of the snap ring over the inner diameter of the pulley leaving the built up portion of the snap ring to fill the void left by the broken flange which satisfactorly retained the cable throughout the opening and closing of the door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Door Cable and Eyelet

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerTim from West Chester, PA

The dishwasher door was heavy because the cable broke counterbalancing the door.

I removed 4 screws holding the panel below the door in place. I removed the cable from the two pulleys and the two extention springs. Reattached the cable assembly to the springs. Put the cable under the pulley and attached the eyelet on each side. Put the 4 screws and panel back.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Door Cable and Eyelet

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerMichael from Madison, AL

Door closure (cable - spring assy) broke

There were no assembly instructions with the part but I read some of the repair stories on the website and got the jest of what to do. It was a very easy fix. Remove the lower access panel, replace and reposition the cable assy. Replace access panel and I'm good to go!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Door Cable and Eyelet

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers

CustomerRobert from Corpus Christi, TX

Spring had broken

removed cover from front of unit installed new spring and reinstalled cover very easy and was pleased with the quick delivery of the order

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerRon from Blackfoot, ID

Broken door cable & leaky door gasket

Took off the old and put on the new. Not complicated at all. Just had to take off the kick plate for the cable.

Help other customers find the most helpful instructions.

Were these instructions helpful?