Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS261576
This slide is mounted to each side of the upper cabinet wall. The dishrack wheels roll inside this track, which guides the upper rack.
This part works with the following brands: GE, Hotpoint & Kenmore.
The repair was easy. A couple turns of a screwdriver was all that was necessary to remove the rollers and slide assembly. The I simple installed the new rollers. Slid the slide into place between the rollers and then added the back caps to the slide. Replaced the rack rollers on the top basket and then slid it into position between the new slides. Once in place, I attached the end caps to the front of the slide. Simple and quick.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Using a screwdriver removed upper tray slide end caps.Removed upper tray. Removed and replaced upper tray rollers.Using screwdriver removed track rollers and Track.Assembled track with rear stops. Installed lower track rollers. Holding track in place installed upper track rollers. Installed upper tray and and front track stops.
I removed screws holding the rollers to the side of the dishwasher. I pried the end caps from the slide. I removed the broken part from the upper rack. I then replaced the broken rack roller, inserted into the slide and screwed the rollers which hold the slide into the sides of the dishwasher.
My wife grabbed the upper rack as she fell backwards across the front of the open dishwasher. It broke her fall - she is fine thank goodness - but the roller slides broke and the rail was destroyed. The dishwasher repair was easy - just had to put new parts in place. The detail parts explosion helps in determining how all physically goes together. Everything works as good as new. I used the pliers to remove one of the old wheel axles that was attached to the basket.
I removed the end caps from one end of each slide, then put the rack rollers on the slides, snapped the rack rollers onto the tray, installed the tray in the machine, put the end caps on the slides, and voila, done.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.