260687-1-S-GE-WD24X10015        -HOSE CHAMBER
260687-1-S-GE-WD24X10015        -HOSE CHAMBER 260687-2-S-GE-WD24X10015        -HOSE CHAMBER

HOSE CHAMBER

PartSelect Number PS260687

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Leaking water.
  • Compare At

    $19.99
  • You Save

    $3.33
  • Your Price

    $16.66
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 6 reviews What's this?
1-6 of 6
 

4 of 4 people found this instruction helpful

Parts Used

  • HOSE CHAMBER

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Wrench(Adjustable)

CustomerCasey from Monrovia CA

The plastic hose chamber was damaged and leaked when dishwasher was in use.

First I removed the four screws that secure the dishwasher to the underside of the countertop. Then I removed the four screws from the front cover at the toespace. Next I used an adjustable wrench to turn the feet to lower the unit enough to slide it out of the compartment. I unplugged the dishwasher and turned it on its side in order to access the hose chamber. I used a pliers to loosen the clamps at each end of the hose chamber and removed the the damaged item. Next I slid the ends of the new part into place and used the pliers to reposition the clamps. Finally I returned the dishwasher to an upright position, slid it back into the compartment, adjusted the feet to raise it to the proper height, put the toespace cover back on, secured the top of the unit to the underside of the countertop and I was good to go. No more water leakage.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • HOSE CHAMBER

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerMichael from Lake Como FL

Rear hose broke on back of dishwasher

First i removed the front cover from the dishwasher then i reached under dishwasher and removed the hose ,then installed the new one. the hose was different size on each end. it took a factory hose to fit it. The diagram that partsselect showed of the dishwasher (the breakdown) made ordering the right part a breeze. Thanks PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench set

CustomerTHERESA from HENDERSON NV

A mouse chewed through the hoses to the dishwasher

Ordered the part online and replaced the hoses. Very easy...took maybe 20 minutes

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set, Wrench(Adjustable)

CustomerThomas from NORFOLK VA

Hole in the chamber hose & sump pump inlet

Well the repair was pretty simple and with the parts arriving so fast I didn't really even miss the dishwasher for that long. Thanks to parts select and the very good parts breakdown of my model appliance I got the right parts the first time around. Thank you very much for being there it made my life a little easier.

Tommy

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • HOSE CHAMBER

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerBruce from Isleton CA

Leaking small hose.

At first I thought I would call a repair man.Then I thought-that will be at least $100!So we went online and found the part.Took about four days to arrive.I pulled the dishwasher out and turned it on it's front.The little leaking hose was easy to remove,two clamps,and the new one installed.Total cost-$14.00.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • HOSE CHAMBER

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerNancy from Monongahela PA

Chamber hose had a crack in it.

My husband installed the hose connected the 2 clamps and I was a happy house wife once more. NO MORE dish pan hands.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-6 of 6