http://www.partselect.com/Schematics/GE/GE_Thumb/00119741i01.gif
See part 930 in the diagram

SWITCH RKR

PartSelect Number PS260326

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $24.90
  • You Save

    $4.15
  • Your Price

    $20.75
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 2 reviews What's this?
1-2 of 2
 

5 of 7 people found this instruction helpful

Parts Used

  • SWITCH RKR

Level of DifficultyEasy

Time to do repair:More than 2 hours

ToolsNutdriver, Pliers, Screw drivers

CustomerKim from Wilmington OH

Would not pump in or out.

With no wiring diagram, I was reduced to testing each component discreetly. The "Heated Dry - On/Off" rocker switch tested open in both switch positions. Replacement of it corrected the problem. I'd still love to see a wiring diagram to learn just where (and maybe why) in the circuit that silly switch interrupts current to the fill and pump-out solenoids. I would not recommend this repair without a wiring diagram for anyone unfamiliar with basic electricity and motor, solenoid, etc. operation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • SWITCH RKR

Level of DifficultyReally easy

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers

CustomerRobert from Boynton Beach FL

Rocker switch for heater failed.

Not being familure with the construction of this appliance, I approached it by removing screws on the door pannel to access the rocker terminals.
On line brief instructions indicated a two hour job.
It took me one and a half hours. Now that I know how it is constructed, I could do it in five minutes by useing a thin piece of sheet metal to slide in and compress the rocker switch clamps at top and bottom on the face of the door, pull, detach three connectors and replace new switch. (Five minute job.) Only long nose pliers and thin sheet metal required. no need to remove any screws etc. (Note: Turn power off first.)

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2