| |
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Front Dishrack Wheel
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJennifer from Upper Marlboro MD
Missing wheel on bottom dishwasher rack
All I had to do was remove the wheel from the packaging and snap it into place on the end of the prong on the dishwasher rack.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDavid from New Milford CT
Wheels broken on dish rack
once I found the parts I needed (real easy because of drawings), I ordered them, they came and I installed them. It was that simple!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
Customerjane from milford PA
Broken rollers and wheels
It took a few minutes to remove the old roller and wheel and another few to put on the new ones. Super easy ! Dishwasher racks are gliding like new ones now
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerDaniel from Longmont CO
Dishwasher would not drain
Took off the back screen, 4screws. Unscrewed old piston assembly. Put in new piston assembly, put screen back on. That was all there was to it. Now it drains just fine. I also added 2wheels to the front lower tray.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerFelix A from Orlando FL
Tray will not roll.
New wheels were inserted in place.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Front Dishrack Wheel
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerSherry from Orange Beach AL
Wheel broke on lower rack
I put the part back on. It was simple to figure out. The wheels had been falling off for a couple of years and I kept putting them back on. This time the wheel broke and I went online to see if I could find wheels for my dishwasher. I received them and put it back on. Now I have a spare part in case it happens again. If this has been happening to you, I figured out that there is a difference between the width of the front wheels and the back wheels. Be sure before you order where the wheel came from. Mine are all falling off from time to time. So all the wheels are in different places now. The front wheels are wider than the back wheels or vice versa. Don't remember now. Just be cautious.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Front Dishrack Wheel
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerHarry from Franklin TN
Lower front dishwasher rack wheels
Just bought a condo in TN and the there wasn't any front wheels. Found your web site and ordered the parts.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Front Dishrack Wheel
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJohn from North Little Rock AR
Wheels had broken off
just had to put new wheels on works great
|
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Front Dishrack Wheel
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customermary from atlanta GA
2 front rollers broken
it was simple, just took the rack out and snapped the new rollers on.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDavid from Forest Hills NY
The front wheels on the bottom rack of the dishwasher were missing. This meant the door wouldn't close properly and the lower blade rubbed against the bottom of the rack.
Simply snapped on the four wheels. Really easy.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Front Dishrack Wheel
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWalter from Alpharetta GA
Rack roller had been lost, requiring replacement.
I merely snapped the plastic clip onto a projecting vinyl-coated wire on the rack..
|
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Front Dishrack Wheel
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMichael from Miamisburg OH
Damaged rollor on the bottom rack
My repair was so simple it didn't require tools. It was more trouble finding the website to purchase that replacement part. The new roller just snaps on the rack.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Lower Front Dishrack Wheel
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDave from Brainerd MN
Bottom dish rack roller broke off
Snapped on new roller with fingers. Super easy!
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerShantha from Alpharetta GA
The upper rack was falling and the roller was missing on the lower rack
I installed the roller wheels on the lower rack and the wheels and end cap on the upper rack and the shelves looked like new after I was finished.
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWendy Baldwin from Stowe PA
The stud assembly in the middle of each wheel no longer stayed inside the wheel.
Just pulled off the old wheel. I just had to push in the stud to the wheel and pushed it on to the rack of the dishwasher. Very easy repair! Only disappointing part was that it bothered me to have to purchase the stud with the wheel. I was told they only came as the set. I only needed to purchase that inside stud. My wheels were fine.
|