Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS259136
This wheel is located on the front lower rack. It includes the axle. Sold individually.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Hooked one side & streched springs
Help other customers find the most helpful instructions.
Were these instructions helpful?
All I had to do was remove the wheel from the packaging and snap it into place on the end of the prong on the dishwasher rack.
once I found the parts I needed (real easy because of drawings), I ordered them, they came and I installed them. It was that simple!
It took a few minutes to remove the old roller and wheel and another few to put on the new ones. Super easy ! Dishwasher racks are gliding like new ones now
Took off the back screen, 4screws. Unscrewed old piston assembly. Put in new piston assembly, put screen back on. That was all there was to it. Now it drains just fine. I also added 2wheels to the front lower tray.
New wheels were inserted in place.
I put the part back on. It was simple to figure out. The wheels had been falling off for a couple of years and I kept putting them back on. This time the wheel broke and I went online to see if I could find wheels for my dishwasher. I received them and put it back on. Now I have a spare part in case it happens again. If this has been happening to you, I figured out that there is a difference between the width of the front wheels and the back wheels. Be sure before you order where the wheel came from. Mine are all falling off from time to time. So all the wheels are in different places now. The front wheels are wider than the back wheels or vice versa. Don't remember now. Just be cautious.
Just bought a condo in TN and the there wasn't any front wheels. Found your web site and ordered the parts.
just had to put new wheels on works great
it was simple, just took the rack out and snapped the new rollers on.
Simply snapped on the four wheels. Really easy.
I merely snapped the plastic clip onto a projecting vinyl-coated wire on the rack..
My repair was so simple it didn't require tools. It was more trouble finding the website to purchase that replacement part. The new roller just snaps on the rack.
Snapped on new roller with fingers. Super easy!
I installed the roller wheels on the lower rack and the wheels and end cap on the upper rack and the shelves looked like new after I was finished.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.