BBB A-Plus
259087-1-M-GE-WD12X10074-Single-Lower-Rack-Wheel.jpg
259087-1-S-GE-WD12X10074-Single-Lower-Rack-Wheel.jpg 259087-2-S-GE-WD12X10074-Single-Lower-Rack-Wheel.jpg 259087-3-S-GE-WD12X10074-Single-Lower-Rack-Wheel.jpg

Single Lower Rack Wheel

PartSelect Number PS259087

This wheel is located on the lower rack. It is sold individually and does NOT come with the attaching axle.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Not cleaning properly
In Stock

  • Compare At

    $1.72

  • You Save

    $.29

  • Your Price

    $1.43
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos

For installing this part.

Related Parts

Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Single Wheel Axle

Part Number 2337855

This axle attaches the dishwasher wheel to the rack. Wheel is not included. Sold individually.
$1.04
  In Stock

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 3 4 NEXT > 46-52 of 52

 

0 of 1 people found this instruction helpful

Parts Used

    • Single Lower Rack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerstephen from mashpee MA

Bottom basket of dishwasher kept following out

i needed new rollers and inserts to keep wheels on now its like new when i pull out bottom basket

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Single Lower Rack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDenise from Fair Oaks Ranch TX

Bottom shelf would not roll properly

so easy! Ordered the rollers and clips ... popped them on and done!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customermersedeh from irvine CA

Old rollers were loose and didn't work properly.

I've replaced them with new ones.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGordon from Deltaville VA

The basket rollers tended to fall off - poor design. Two fell off, landed against the heating element and partially melted

The replacement roller studs were better designed. Snapped in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerVikas from Chicago IL

Replacing dishwasher wheels.

Multiple dishwasher wheels on the bottom sliding rack had come off. I somehow lost the wheels so I ordered a few replacements. They were fantastic! Better then the originals.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLinda from Tucson AZ

Bottom rack f dishwasher wheels fell off at every use

I ordered both new wheels and stud that goes in the centers of each wheel. It took longer to cut the bags open than to install them. Works like a dream and no sqeaking and dishwasher works better since it is the correct distance from the water rotation arm on the bottom of the washer! Wonderful experience by an all thumbs do it yourselfer!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

Tools

CustomerRobert from Gothenburg NE

Wheels were falling of the lower rack

I just pulled the old ones off and snapped the new ones on. Be sure you put the rollers on the studs first and then put the studs on the rack. Also order new rollers although they may look fine it is well worth the eight bucks extra The whole thing took about 5 minutes

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 3 4 NEXT > 46-52 of 52