| |
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerEdwin from Waldwick NJ
Wheels kept falling off
Removed the old wheels and studs. Pressed on the new studs and wheels. Viola.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAlfred from Mashpee MA
The lower rack wheels had fallen off and melted
The best money I've spent on a repair. Easy. The lower rack now rolls in and out smoothly.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerKimberly from Durango CO
Some wheels had broken, was really hard to move rack in and out.
I am NOT handy, but my husband was gone when the wheels and stud/axles came. I was able to replace all of them in about ten minutes with no tools. Easy and no more frustrations!!!!!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWalter from HICKSVILLE NY
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerCD from Albuquerque NM
Internal plastic mechanical parts broke
Dishwasher rollers and other mechanical parts of plastic and rubber dry out and fail. A service call to an apppiiance repair person would have cost more than all the parts to repair the problem. Ordered them online on Sunday night, received them the following Wednesday, probably as fast as I could have had an appointment for a repairman. Changed out the parts in ten minutes and pocketed the change. $30 out of pocket instead of about $100, thanks to partselect.com.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerJames from Syracuse NY
Lower rack wheels fell off
Remove the old assembly (roller and stud) if they are still present
Push the new roller onto the new stud
then push completed part onto lower rack until it snaps
These are much better quality than the originals
|
2 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerRussell from Grand Prairie TX
Missing parts
I just purchased a house just before it went on foreclosure and several parts to th dishwasher was missing. I went on th internet and came upon your web site. Having no manual I thought that this was going to be abut as much fun as stepping on landmines. I was surprised that I entered the model number and was able o get all the parts hat I needed. The replacement was easy but a word to the wise sometimes on wheels they sell them with the locks that hold them to the basket and they will have the same part number. Other then that a fun experience.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJoLinda from Littleton CO
Wheel fell off and was melted.
I placed a new snap device into the wheel athen attached it to the lower rack.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLyle A. from Lakewood WA
The wheel "keeper" no longer held wheel in place.
Took the old wheel off and replaced it with the new wheel. No tools necessary. Very simple to repair or make the change needed.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerILONA from AUSTIN TX
One wheel was missing, others kept on falling off
Just snapped studs and wheels together and put them into place.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerchris from Lordsburg NM
Wheels worn out kept coming off
Just snap wheel axle into wheel then snap the whole wheel assembly on to rack.Much better design.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerRobert from White Stone VA
Wheels on dish rack were falling off due to hard water and water temperature..
Snapped off the old wheels and clips and installed the new wheels. Make sure the wheels are installed on the holder prior to snapping the clip onto the dish rack. Very easy job.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerYvonne from Austin TX
Bottom rack wheels falling off
very simple.... everything fit perfectly. So glad I was able to find others with same problem.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerKathie from Baltimore MD
The wheels kept falling off the lowe rack
I snapped the wheel axle onto the wheel then snapped the wheel onto the dishwasher rack. It was very easy and straight forward.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerBarbara from Miles City MT
One of the wheels fell off of my rack and I threw it away not realizing what it was.
I ordered a new wheel - from another company - and it was fine - but it didn't come with the axle. So I ordered both from you and it worked just fine. Thanks so much.
|