This is the tub gasket replacement for your dishwasher. The tub gasket fits around the perimeter of the door and forms a seal that prevents the dishwasher from leaking when it is filled with water. If the tub gasket is loose or damaged, you may notice your dishwasher leaking. The tub gasket can wear over time, or become stretched. In either case it will need to be replaced to prevent a leak. The gasket is made of black rubber and is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD08X10018 replaces these:
AP3425307, 943373, WD8X10018
Customer Reviews
Average Rating:
★★★★★
★★★★★
19 Reviews
4.3
Filter By Rating:
5 Stars
14
4 Stars
2
3 Stars
0
2 Stars
1
1 Star
2
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Chris K - July 9, 2023
Verified Purchase
Great replacement seal
Old seal came out easy and new seal was installed easily within 5 min. Took a few tries to get the ends even on each side of the washer. No leaks.
★★★★★
★★★★★
Emmett H - September 10, 2022
Verified Purchase
Good fit.
Good quality but gasket should be rolled up instead of folded which causes kinks.
★★★★★
★★★★★
Robert P - June 23, 2022
Verified Purchase
Easy repair
It was easy to replace.It took just a few minutes
★★★★★
★★★★★
Pamala M - December 4, 2021
Verified Purchase
easy repair
the part was the correct one and it went on very easy. It was not the part that was broken so we had to buy a new washer.
thanks
★★★★★
★★★★★
Cindy T - October 7, 2021
Verified Purchase
Easy repair
This was SO easy to replace and works great
★★★★★
★★★★★
Michael V - May 5, 2021
Verified Purchase
Tub Gasket
works great took 2 mins to install just pull the old one out clean the track and push the new one in.
★★★★★
★★★★★
MARIA F - April 25, 2021
Verified Purchase
idiot proof!
took five minutes pull out the old,line up the center dot at the top and push in the new!
★★★★★
★★★★★
Antonio De La R - January 6, 2021
Verified Purchase
Great part
Home warranty guy said I need a new dishwasher ordered this seal and fixed it easy to install
★★★★★
★★★★★
Ann A - September 17, 2020
Verified Purchase
Nice fresh gasket
Installed in minutes with no tools. Fit and went in beautifully. Good price.
★★★★★
★★★★★
Jay A - August 15, 2020
Verified Purchase
Perfect fit, easy DIY project
Perfect fit, easy repair for a part that had simply done it's time and was due to be replaced. I saw a couple reviews that noted the door being very hard to close. Initially it is, but after running the dishwasher just one cycle the door was much easier to close. And no more leaks.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 12 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Leaked front right side
Followed the instructions that came with the my order
robert from HAYMARKET, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking door
changed the door gasket no tools,just pulled out the old,lined up the dot (printed on gasket)on the new and started at the top pushed in the new took five minute,the short bottom door seal required a phillips head screwdriver to remove the inside door screws(six screws) the two on the bottom are different they attach to the door hinge and
... Read more are machine thread the other four are coarse thread.lifted off the panel slide off the old(pay attention to which way the curve goes) slide on the new replaced the panel put in the six screws.the job is done! the door will be tight to close but will be easier after a few uses.
No way to repair since the wrong part was sent. I have sent numerous emails with order numbers, part numbers, model numbers BUT I have no return label to send this back and get a refund. Maybe this will get someone's attention. Pretty disgusted!
I watched the parts select video and followed their instructions. Only “ issue” was there were no screws on the door behind the exterior skin as in the video, so lifting the inside door liner to put the new lower door seal in was concerning. I was able to pull the liner up enough and slid the seal in with no problem. The video was the key
... Read more to a smooth repair.
I removed the old seal, cleaned behind it, and then put the new seal in. We saw a video on You Tube on how to do it. Partselect also sent instructions on a e mail with the order receipt. We enjoyed working with you guys. Your customer service representative was very nice and accurate in sending out the part. All went as she said it w
... Read moreould. Thanks!!
Read less
Estelle from Queen Creek, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking door
The gaskets arrived in a few days after my order. The tub seal was easy to change and tool only a few minutes with no tools. After I watched a video on the GE website I pulled out the old gasket, wiped out the slot, centered the new gasket at the top, pushed it in the slot to each corner.Then I pulled the end to the end of the track and
... Read morepushed it in the full side from the bottom up. repeated on the other side.The lower gasket was harder and took about 40 minutes. I took eh door apart but did not need to it could be done with a mirror. Pull the old one out from one side. Don't be afraid of tearing it but get it all out. The new one will snap into the slot if you use a mirror to look in the door and see.
I removed the old gasket very easily as there wasn't even glue holding it in place. The new gasket just pressed right into a slot and makes a water tight seal.
David from North Charleston, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leakage around the door
1. Replacing the TUB GASKET is very easy and does not require tools. Pull out the old gasket and wipe out the channel. The gasket is marked with a small paint mark at the center and that indicates where to start at the top. The larger part of the gasket goes towards the outside. Firmly press the gasket all the way into the channel. T
... Read morehe gasket should just reach the bottom of the tub. Do not use tools or you may damage the gasket. The gasket must be nearly all the way into the channel or the door will not close. Expect the door to close quite firmly for the first few uses.
2. Replacing the DOOR BOTTOM SHORT SEAL. This repair is not technically difficult, but is physically difficult. Without complete removal of the door, nothing needs to be or can be taken apart to do this replacement. I recommend removal of the lower basket, the upper basket and the wash arm before beginning. A drop light inside the tub is helpful. Using pliers or vise-grips grab the old seal and bend up and down then back and forth until it will slide all the way to one side. Once to one side use pliers to bent towards the back until its snap seal (observe new seal) realeases and you can carefully continue by hand to remove the seal the rest of the way across the bottom of the door. Observe how the old seal came out and which side was UP. With the new seal in hand, gently work the snap seal open slightly (this will help to get it back in place). With a flashlight and inspection mirror, check where the new seal will attach to (and clean if necessary). Center the new seal with the correct side up and work from one end. You may need pliers to push in the new seal, but be very careful not to damage the new bottom seal soft part. When it snaps in place you are done.
Original gasket was old and had started to dry-rot.
Installing the gasket took about 45 seconds. It actually took more time to scrub the area clean prior to installing. One quick trick I found was to fold the replacement gasket in two, and use that mark to center the gasket and press it in from there. That way you don't have any guesswork as to how much slack to allow for when starting.
Gary from Chesterfield, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sara
November 22, 2017
I have a GE profile dishwasher and the 72 inch rubber gasket popped out and needs to be replaced, what item number do I replace it with?
For model number PDW7880J15SS
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS258656. Good luck with the repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Sandy Mcclure
January 30, 2019
Leaking at right side of the door. No water under dishwasher. Is this the black seal on the inside
For model number GSD6300GOOBB
Hello Sandy, thank you for your question. We would recommend checking the tub seal and lower door seal to see if they have disintegrated or if they are loose. If you can't determine by looking at the parts, we would recommend replacing both. I hope this helps!
Hello Marcia, Thank you for your inquiry. We have researched the model number that you have provided and show the gasket that goes between the tub and the door as part# PS258656 and the gasket that goes in the bottom of the door as part# PS1018448. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
