| |
5 of 9 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerJoel from Temple TX
The spray arm was off and without brackets
I looked at the diagram on the web site, the same one that I ordered from, and figured out how all the parts were suppose to go together. The spray arm has 2 brackets so it was a matter of aligning the tube that feeds the spray arm with the supply line on the back of he dishwasher. I had to move it once to get it properly aligned but found it to be simple.
|
4 of 7 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerGeorge from Palmdale CA
Broken spark ignitor/ broken spray arm holder
removed burners from cooktop, hardest part was to lift glass top because of the double back tape holding unit to counter, replaced damaged ignitor clip and reinstalled with new one, placed all parts back, job done.
On dishwasher it was as simple as using nut driver to drive 8/16 self tapping screw onto new part and checking for arm rotating without hitting anything. done. thanks guys!
|
2 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerRussell from Grand Prairie TX
Missing parts
I just purchased a house just before it went on foreclosure and several parts to th dishwasher was missing. I went on th internet and came upon your web site. Having no manual I thought that this was going to be abut as much fun as stepping on landmines. I was surprised that I entered the model number and was able o get all the parts hat I needed. The replacement was easy but a word to the wise sometimes on wheels they sell them with the locks that hold them to the basket and they will have the same part number. Other then that a fun experience.
|