http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/ZLC86AO7.gif
See part 6 in the diagram

Door Handle - Black

PartSelect Number PS2583001

Screws NOT included.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Door not closing properly.
  • Compare At

    $90.26
  • You Save

    $15.04
  • Your Price

    $75.22
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 11 reviews What's this?
1-11 of 11
 

67 of 74 people found this instruction helpful

Parts Used

  • Door Handle - Black

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerTommy from Spring Hill TN

The plastice door handle broke off at the ends on the front of the microwave

Let me start by saying that this model microwave is nice, but there shouldn't be a plastic handle placed on it when it is mounted above a gas stove-top. The manufacturer should know this but I guess it was a poor decision on their part.

I popped the inside of the door off of the microwave. I then unscrewed the two screws that were holding the next bracket on and popped it off the door. When you take the second piece of the door off, then the glass and front come apart. You can then unscrew the two screws the hold the handle on. Replace the old handle with the new one and work back in the steps you took. A small tipped screw driver is a must.

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 19 people found this instruction helpful

Parts Used

  • Door Handle - Black

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerNova from Phoenix AZ

Microwave handle broke off

My repair worked out to be a cinch! My microwave looked very funny without it's handle. I did a little research on how to replace the handle and after popping the insert out of the inside of the microwave door, I was then able to remove the two screws that held the outside panel of the door (the part with the glass) to the part with the hinges. After removing the screws, I carefully used my trusty butter knife and screw driver to pry and pop the outside panel away. This was the most time consuming part of the job. However, once it was fully off, I unscrewed the screws that held the previous handle on and fastened the new handle with the new screws provided. Popping the door all back together was super easy. However, don't forget to put the screws back in that hold the outter panel on to the part with the hinges. :-) Good luck DIY'ers!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

13 of 15 people found this instruction helpful

Parts Used

  • Door Handle - Black

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerThomas from Maysville NC

Handle broken

Lifted the door up and removed entire door, took pry bar and removed the snap on plastic cover very easy. Has plastic snaps on the inside. Then removed the glass window same way. then you can see the two screws holding the handle on. Remove screws, then snap back together making sure you go slowly not to break any plastic snaps.The job was a lot eaiser than I thought it would be.
The replacement part was a perfect fit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 15 people found this instruction helpful

Parts Used

  • Door Handle - Black

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJACK from PUYALLUP WA

Poorly made handle assembly.

This particular model has a poorly made handle assembly. We are adult couple that rarely uses the microwave and have no children in our home. This handle was extremely gently used and after only a couple months it broke on the bottom attachment.

I would start by recommending that nobody ever buy a frigidaire microwave no matter how nice it looks or how high end the price is.

PartSelect was easy to navigate and the part came as expected and in a timely manner.

It was an easy fix and hopefully the new handle will last a lot longet than the old one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 7 people found this instruction helpful

Parts Used

  • Door Handle - Black

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerTera from Tallahassee FL

Broken microwave door handle

First, take a butter knife and gently pry out the plastic frame inside the door of the microwave. There are tabs holding it in place in 12-15 different spots. Then there are two screws on the left side of the door back that need to be removed. Then we used a butter knife again to go around the door frame and pry off the actual door so that all that was left was a metal bracket attached to the actual microwave. Be sure to hold the door as you pry it off so it doesn't just fall to the ground and shatter the tempered glass. At this point, you can access the two screws for the handle. Work backwards to put everything together again. The final plastic frame just pops right back in and... hopefully... wha-la, new handle. Good luck!

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used

  • Door Handle - Black

Level of DifficultyVery Difficult

Time to do repair:15 - 30 mins

Tools

CustomerJennifer from Copperas Cove TX

Broke microwave trying to replace broken handle

The front panel to the microwave broke while trying to disassemble in order to replace the handle. Ended up having to replace the entire microwave. There were no installation instructions and this particular microwave is made of cheap material that breaks easily.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 10 people found this instruction helpful

Parts Used

  • Door Handle - Black

Level of DifficultyDifficult

Time to do repair:More than 2 hours

ToolsPliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)

CustomerMargret from Portland ME

Remove/replace broken door handle.

Basically had to take the door apart from the inside on while still on it's hinges, at least the very back plastic part and the part of the metal part (I couldn't get it all the way off). It was a nightmare getting the screws out of what remained of the handle, as they were embedded in the plastic, and for the top one I basically chiseled away at the plastic so that only the screw remained (which I had stripped.) And my hands are raw from trying to access the upper screw behind the metal plate. Putting the handle on required a special L-shaped screwdriver, which I had to purchase. I tried in vain to screw in the bottom of the handle for about an hour, but the hole did not align properly with the handle, (which may have been the problem in the first place), so I gave up and superglued it. I only hope that I did not create leaks in the oven, given all my prying and whatnot, or that the superglue doesn't give off any toxins while cooking. Phew!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 9 people found this instruction helpful

Parts Used

  • Door Handle - Black

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerThomas from Wall NJ

Handle broken needed replacement

Part came very quickly and with the help of youtube videos I was able to remove old handle and replace it with the new one with minimal time, tools and effort.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 7 people found this instruction helpful

Parts Used

  • Door Handle - Black

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerMike from Walworth NY

Handle broke

Removed the inside of the front door , pried the door seal apart with a butter knife so I could access the screws. Removed old screws and handle parts, installed new handle. The door will lift off making it easier to get to the screws. Then everything just popped back together, make sure the light goes out when you close the door, if it does you're done, if not check the door seal and make sure it's on evenly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

  • Door Handle - Black

Level of DifficultyVery Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customercynthia from atlanta GA

Replace handle on microwave door.

It was easy to get the back panel off but getting the screws out to replace the handle was quite difficult. Your prompt delivery of the part was awesome.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 6 people found this instruction helpful

Parts Used

  • Door Handle - Black

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers

CustomerDon D. from Oklahoma City OK

Handle broke off

Well first off I would like to say I shouldn't have to repair a high end appliance that's not even 3 years old. Okay I took the inside of the door off. It was just snapped in. There was a piece of metal covering one of the screws(the top one). I wasn't about to take it out so I drilled an access hole to the screw. Pulled the two screws, replaced the handle, replaced the screws and that was it. The most time was spent trying to figure out how to get to the broke handle to get it off.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-11 of 11