Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
May 7, 2018
The lighted control panel (on/off, temp setting, etc) does not light up. I've removed the cover and it looks like I can replace the board by removing three screws. The board also includes the wiring with the electronics plug. Is partselect # ps2582890 (manufacturer part # 5304477181) the correct part I need to replace this item? Thanks for any help you can give me.
For model number LRA187MT2
Hi David, Thank you for the question. The PartSelect Number: PS2582890 is the PC Board with the display and the buttons. This board also includes the wire harness. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Melvin
March 2, 2018
Is the relay to turn on the compressor located on the control board?
For model number LRA157MT10
Hi Melvin, Thank you for the question. The relay is on the board but it is not sold separately and the board will need to be replaced. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Thomas
April 25, 2018
Does the control panel have the remote receiver in it, replaced remote and still not operating, the panel functions work manually.
For model number LRA257ST2
Hi Thomas, Thank you for the question. The PC Board with the Remote Receiver is PartSelect Number: PS2582890. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jess
August 15, 2022
The compressor doesn't shut off. unit cools like it's should but when it is shut down i can still hear compressor humming. only way to shut down completely is to unplug, the cord is HOT, it's a fire hazard,if it doesn't trip out. Before I junk it I'm curious if a new control board would work or is it worth it?
For model number 253.70151
Hello Jess, Thank you for the question. Before replacing the Control Board, we suggest testing the Thermistor. You can test the Thermistor with a Multimeter. The thermistors should have a resistance of approximately 5K ohms at room temperature. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Eric
July 21, 2023
When plugged in, the unit will start running but will not react to any button pushes (neither the touch pad on unit nor the remote). There is also no LED readout illuminated. The unit cools but must be unplugged to turn it off. I believe the issue to be with the touch pad panel but cannot rule out the main control circuit board
For model number CAE18ESR-R410A
Hello Eric, thank you for the query. Based on the description you have provided, the issue is most probably with the display board, part number PS2582890. We would recommend checking the display board to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
