This oven control board is for ranges.
Oven control board monitors the temperature and controls the oven heat.
Unplug the range or shut off the house circuit breaker for the range before servicing the unit. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Touchpad does not respond | Little to no heat when baking | Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Crosley, Tappan, Westinghouse.
Part# 5304511908 replaces these:
AP6285963, 316418204, 316557104, 316557114
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
5 Stars
2
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ricky D - January 18, 2023
Verified Purchase
Easy repair and a good part
The part was very easy to replace and my stove is working like new and I would use
Part select again.
★★★★★
★★★★★
Debra B - August 3, 2022
Verified Purchase
Wonderful
Repair was extremely easy and quick. It fixed the problem!
★★★★★
★★★★★
David K - March 16, 2018
Verified Purchase
Correct part sent
It was easy to replace and appreciated fast service
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Control pad for the oven won't turn on
Took out 6 screws from the back of the oven and removed metal cover. Unplug 2 connectors from the old control pad and removed mounting screws. Plugged in 2 connectors from the new panel, mount it and close up cover.
Lee from FT MITCHELL, KY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not work
Took 5 screws off back of stove, removed 2 screws from control board, replaced board, put back together, make sure you un plug stove before removing back.
Glenn from MONETT, MO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
14 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
RICHARD
January 2, 2019
Oven won't work, and it won't go into clean mode
For model number CRE 3860 LWB
Hi Richard,
Thank you for your question. If the oven will not work, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the bake and broil elements, the terminal block, the sensor, and the electronic control board. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
David
April 30, 2019
My front panel is not lighting up. The burners still turn on and the oven light work's
For model number Tef361esc
Hello David, Thank you for the question. This sounds like the Electronic Control Board is defective and will need to be replaced, PartSelect Number PS12364897. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nellie
June 25, 2019
My oven made a pop sound and sparks no longer works but stove top works fine clock still works. Checked elements they look fine was told might need to replace control board. Is there a way to check and see if control board is bad.
For model number FEF364DWA
Hello Nellie, Thank you for the question. I suggest testing both elements and the Oven Temperature Sensor with a multi meter. If both test good then the board will need to be replaced.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Frank
February 6, 2020
The broil element comes on instead of the bake element when bake is selected. You suggested to replace the control board. Could it be the oven relay board?
For model number EW30ES6CGS6
Hi Frank. I do not see any way it could be the relay board. It is likely the control board. Thank you for your question and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Quinton
January 16, 2019
The vertical plug that attaches to control panel is charred at the top should i replace harness as well?
For model number Ffef3015lsa
Hi Quinton, thank you for your question. If your wiring is damaged then you may need to replace it as well. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Roy
April 5, 2018
My oven will be working then will go off for a while, then i have to reset it. Could it be the clock control causing this?
For model number FEF362MXESC
Hi Roy,
Thank you for your question. I could suggest maybe taking a look at your oven temperature sensor and both elements first. You can do a test with them with a multi meter for those three parts. If they are all working fine then it may be your control board that is causing the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Frank
February 6, 2020
The broil element comes on instead of the bake element when bake is selected.
For model number EW30ES6CGS6
Hello Frank, Thank you for the question. This normally indicates a defective Electronic Oven Control Board and it should be replaced. We hope this helps.
Was this helpful?
Thank you for voting!
Travis
October 3, 2019
My oven turns on all the eyes when i try to turn stove on.
For model number W10285078
Hello Travis, thank you for writing. This may be due to either a faulty Surface Burner Terminal Block & Receptacle, or Electronic Control Board, but we will need the model number for your stove to locate the correct replacements for it. We look forward to hearing back from you!
Was this helpful?
Thank you for voting!
Mark
November 7, 2019
Error code f01 displayed. Oven element was off and broiler element was on. Unplugged oven to reset. Turned oven back on and oven element still didn't turn on instead broiler element did. Do i need to replace control panel
For model number fefl63fsb
Hello Mark,
Thank you for your question. Yes, you would need to replace the control board under part PS12364897 for your model. Hope this helps!
Was this helpful?
Thank you for voting!
Diane
November 12, 2019
Can i just buy the baked relay for this oven and have the old one uninstalled in the new one installed the relay would be much cheaper then the e o c board
For model number FEF354GSA
Hello Diane and thanks for writing.
Sorry but the relay is not sold individually, it comes of part of the control board only. We hope this helps. Please contact us at any time
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
