| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerChris from Driggs ID
Powdery residue left on dishes in both racks after cycle.
I replaced the top spray arm and the bottom spray arm. The middle one looked like it could use replacement but it wasn't an available part. Dishes come out clean again. I didn't need any tools to install or remove the old spray arms.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customercharles from vancouver WA
The upper spray arm fell apart and had to buy a new upper spray arm
I took the upper rack out and sent it aside and then on the top I just screwed the new one on by my hand and tighten the upper spray arm until it was snugged.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerruss from cape canaveral FL
Upper spray arm fell off all the time
unscrewed old one and screwed in the new .
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerBetsy from Thornton CO
Upper spray arm fell off.
The repair only took a few minutes. The hardest part was, after removing the part that was still attached, reaching and getting the threads to mesh so it could be screwed on. Maybe because the unit was full, my access was limited, so the extra 15 minutes were operator error.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWhit from Murfreesboro TN
The upper spray arm came apart and fell off
The new part replaced three pieces that had disassembled. I simply unscrewed the remaining piece and screwed in the new assembly which fit and worked perfectly. It took less than 10 minutes to repair. During the order process this company asked enough questions to insure that the correct part for that machine was ordered. I will order again, no doubt, when needed. The part arrived on time and as described...............Thanks Whit Smith
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerbrian from rochester NY
Upper spray arm would fall off during wash cycle.
So simple a caveman could do it....
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:Less than 15 mins
Tools
Customerjulian from Rio Rico AZ
Putting spray arm back together
Big Spoons too high in washer bottom broke off wand. You can simply refit the same part back together if you try. I thought I needed a new one but I didn't. Very ingenious. I will save the one I ordered just in case
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerSusie R from Rocksprings TX
Upper spray arm came apart
Very simple...just unscrew the spray arm and screw on the new one. I had put the old spray arm back together several times, but each wash it would come apart. Quick, simple solution!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerClifton from Marshall MI
Upper spray arm broken
The upper spray arm assembly came apart during use of the dishwasher. When the new one came I simply unscrewed the old one, by hand, and replaced it with the new one. It works now as it should. Total time to fix.... 2 minutes. If only everthing was this simple. Cudos to the engineers who designed this fixable problem with such ease.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerToby from Tooele UT
The upper spray arm came apart during a wash cycle
I removed the existing spray arm ring with my fingers (looking at the new part, I could see that it simply screwed into the tub)and screwed the new part in finger-tight. That was all it took!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerStaci from Belington WV
Upper spray arm keeps falling off
2 days after ordering the part from partselect I received the part. It took me about 5 minutes to install and has worked beautifully ever since. Great service, super easy installation. Would recommend to anyone.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerOzivaldo from West Palm Beach FL
Upper spray arm became separated
It was as simple as take it out of the wrap, unscrew the broken part and replace it with the new one. quite honestly, it was as easy as dialing the repair person.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerrichard from Green Bay WI
Spray arm kept falling off
Unscrewed the collar that used to hold the spray arm in place and then screwed on the new one. Very simple. I'm glad that I was able to get the parts without incurring a service visit and significant markup.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerdeena from perris CA
Upper spray arm fell off repeatedly
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerfrank h from las vegas NV
Upper spray arm came off several times
ordered part,arrived in two days, replaced.all done.
part was correct, delivery just as fast
|