This drawer track or rack slider bar is for use in your dishwasher. It connects to the upper dish rack, and allows the rack top slide in and out. You may need to replace this part if your old rack will not slide out, or your old drawer track is warped and causes the dish rack wheels to fall off or jam. You will need a flat blade screwdriver to remove the rear stop, so you can pull out the drawer track.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your KitchenAid Dishwasher Drawer Track
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Whirlpool, Maytag.
Part# WPW10195623 replaces these:
AP6016779, W10195623, W10324563, W10331879
Customer Reviews
Average Rating:
★★★★★
★★★★★
21 Reviews
4.2
Filter By Rating:
5 Stars
17
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
4
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Stacy R - March 24, 2023
Verified Purchase
Easy Repair
Very simple replacement. Easy to follow instruction video. Arrived very quickly.
★★★★★
★★★★★
Chip W - April 17, 2022
Verified Purchase
Quick delivery, accurate part
Delivery was quicker than expected abs part for perfectly. Will return to the site for future repairs.
★★★★★
★★★★★
Nicole H - February 5, 2022
Verified Purchase
Even a monkey can do it
A part on our dishwasher broke. Hubby wanted to hire someone. I googled the part, found your website, ordered the part, received the part, watched the video, replaced the part. All for far less than a professional would cost, and in the same time or quicker than a pro. Very happy!
★★★★★
★★★★★
Wesley Q - January 23, 2022
Verified Purchase
older dishwasher
Very good company to do business with.
★★★★★
★★★★★
Robert H - August 21, 2021
Verified Purchase
Shipped fast and install was simple
I appreciated the fact that they send a how to video with your emailed receipt. Made install simple.
★★★★★
★★★★★
David W - January 13, 2021
Verified Purchase
Easy repair and the video showed just how simple it was
The part arrived in perfect condition and was very simple to install after watching the video..the part for as it should.
★★★★★
★★★★★
SHERRI N - August 24, 2020
Verified Purchase
Dishwasher drawer track
Very happy that the part got here so fast. Would be helpful to have some kind of instructions for replacing the old track. Not everything was very clear!!
★★★★★
★★★★★
Thomas Pitcher J - March 5, 2020
Verified Purchase
Easy repair
Exact fit part that was easily installed. Video instructions were clear and easily followed
★★★★★
★★★★★
Sean S - August 16, 2019
Verified Purchase
Worked as expected
Worked as expected
★★★★★
★★★★★
James G - June 14, 2019
Verified Purchase
Dishwasher upper rack repair
I ordered the drawer tracks and the top rack adjusters since the wheels on the upper rack on the original parts had broken and would no come loose and fall off when moving the upper rack during doing the dishes. The parts were very easy to replace and the dishwasher is working better then the original.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 9 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Rack was drooping, falling off wheels.
VIEW THE INSTALLATION VIDEOS. They made it clear and simple...wish every company did them...
Plastic pieces had broken on both the top and bottom racks
The parts select site had an excellent breakdown of what I needed to replace. When I got the pieces, however, it wasn't so apparent how to do it. I actually used YouTube video to show the process.
The trickiest part was actually uninstalling the broken pieces. I had to work backwards through the YouTube video.
The o
... Read morether tricky bit is having a sense of how hard you can push to snap plastic pieces in and out.
Also, watch the whole video! I didn't, and I ran out for a tool (a star driver, I think that's what it's called) that was actually in the bag of screws that came with the assembly.
It seems like Kitchen Aid realizes they have a problem with plastic fatigue, because they have replaced some of the plastic parts with metal.
If you take your time and stay organized this is a very doable repair.
Installing the rack stop clip was, at first, very difficult, if not impossible.
Stared at it and deduced that the clip was not intended to slide into the track from the end, but that it was intended to snap in from the side. NO WHERE WAS THERE A SINGLE SENTENCE TELLING HOW TO DO THIS. And don't give me the old bromide, "Well, everyone knows how to do this." Nope, It is not in my DNA, so a sentence included with t
... Read morehe clip in the package would have saved me time and pain.
1. Remove the top rack 2. Take a screwdriver and pry off back plastic stop at end of track 3. Slide track off, then slide new track on 4. Take the plastic back stop originally pried off of old track and snap into new track 5. Open plastic stop at front of track 6. Replace top rack. 7. Close plastic stop at fr
... Read moreom of track 8. Good to go!
Read less
LES from NORTH PORT, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels on Upper Rack Adjuster had come off
Followed the supplied instructions for the installation of the left and right rack adjuster kit. This is a pretty simple process, however, I suggest to take your time, read the instructions twice if you don't understand it the first time, and look at the pictures carefully because they are rather small. I also installed new drawer tracks.
... Read more Again, a pretty simple process but make sure you look carefully at the rack stop clip before installing into the track. They are pushed in from the side, and not from the rear as I had first assumed. The front clips come installed on the tracks, and just flip open by 180 degrees so the top basket can be pushed in.
Removed old tracks. Note instructions do not tell you to remove the back stops one each side.... let alone how. Installing new track is really easy. Place the old lock on the track. Strange they don't arrive with a new lock, it is just a plastic insert and must be cheap. The only tricky part is replacing the rack wheels and height adjuste
... Read morer. If the instructions and particularly the pictures in these, were better it would all have been a breeze. Really worth the effort though!
Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
July 31, 2018
Is this part interchangeable right or left side?
Hello John, Thank you for the question. This Drawer Track is interchangeable right or left side. Hope this helps!
18 people found this helpful.
Was this helpful?
Thank you for voting!
Denise
May 23, 2019
Does this kit come with two tracks?
For model number KUDS30FXSS5
Hello Denise, thank you for your question. This is only one track, they are sold separately. I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Frank
August 16, 2017
The wheels for the upper basket seem to have come loose in the track, what part(s) do i need to fix that?
For model number KUDS30FXSS5
Hello Frank, thank you for contacting us. The upper rack parts for this model have been upgraded by the manufacturer, they came out with a redesigned rack adjuster kit - left and right side, part number PS10064063 This kit includes 2 adjuster assemblies, 1 left hand and 1 right hand actuator cover, 2 gray adjuster covers, and 2 gray adjuster housings. Hope this helps!
The upper rack track keeps coming out of the holders (wheels on side wall of dishwasher). Is this the correct part to fix this?
For model number JDB8000AWC0
Hi Michelle,
Thank you for your question. Yes, this should be the correct part you need to fix this issue. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Scott
April 30, 2018
For the upper rack, the two drawer tracks are held to the side walls by plastic wheel assemblies (2 per track). My wheel assemblies are worn out. I can't find these on your site - if you sell them, would you please point me towards them? Thank you
For model number KUDS35FXSS1
Hello Scott, thank you for your question. The wheels that are mounted to the inside tub walls are part number WPW10505748. Good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
January 9, 2019
Hi - do i need to order the rear stop along with a drawer track?
For model number KUDS35FXWH8
Hello Susan, thank you for your question. The rear stop does not come with this part. It has to be ordered separately if needed, the part number is Part Number: PS11750071. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Curtis
December 1, 2019
The front rack stop that flips out of the to remove the upper rack is missing. Do you have a part number for the front rack stop on the glider. I am not talking about the rack stops in the rear I have those already.
For model number WDT710PAYM6
Hello Curtis, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11750072 and only sold as part of the Drawer Track. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Toddy
March 18, 2023
The arm on my upper rack dishwasher has broken off the front stop and now the rack falls on one side because the metal support has nothing to “grab on to to extend out” on the rack. Will this replacement arm work for my model dishwasher?
For model number KUDE40FXSP5
Hello Toddy, thank you for your question. The drawer track, part number PS11750072, you mentioned, is compatible with your dishwasher. We would also recommend the rack stop clip, part number PS11750071, to fix the issue. We hope that helps!
The white plastic roller that fits into the upper dish rack (right side) has broken. Can i buy one of these rollers, and if so, what is the part number?
For model number Kenmore 665.13262K110
Hello Honor, thank you for writing. It is a part of the Rack Adjuster Kit part PS10064063 on your model.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bridget
July 25, 2019
The front rack stop is broken on the right side upper rack glide. Do I order a replacement glide or is the rack stop a different part?
For model number KUDs35FXSS1
Hello Bridget, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11750071 for the Rack Stop Clip. Hope this helps!
