6 of 9 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:15 - 30 mins
Customerwilliam from andover, MA
Trash compactor ram not moving - broken plastic drive gear
1) pulled the compactor from under the counter and unplugged it. 2) tipped it on its side 3) removed 5 screws (3 on the motor side and two on the bottom) an took off the bottom cover plate. 3) using the pliers i pulled of the retainer clip from the large drive gear(it had broken on only the hub remain attached) 4) i then just slid in the new gear, snapped in the retainer clip and buttoned up the cover plate. Note I did not replace the other parts that came in the package because the existing ones seemed ok.