28 of 63 people found this instruction helpful
- Motor and Inverter Assembly
Level of DifficultyReally Easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerANDREW from LAUDERHILL, FL
Unit would agitate but not spin
First release pressure clips on the top front to release the front cover. (Slid screw driver between top and and front cover). Disconnect connectors to motor. Remove 4 nuts with socket set. Install belt on motor first then while holding belt to flywheel work around to install. Note: the drum will not take off right away, it will wait a short while then start and will increase in speed step by step.