Quick Question!

Have you ever purchased from PartSelect.com before?

2577653-1-S-GE-WD28X10210-Upper Rack Assembly
2577653-1-S-GE-WD28X10210-Upper Rack Assembly 2577653-2-S-GE-WD28X10210-Upper Rack Assembly http://www.partselect.com/Schematics/GE/00125499i02.gif

Upper Rack Assembly

PartSelect Number PS2577653

This dishrack includes the wheels.

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$146.47

You Save

$24.41

Your Price

$122.06
Order within the next 4 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 7 reviews What's this?
1-7 of 7
 

11 of 12 people found this instruction helpful

Parts Used:
Level of Difficulty: Difficult
Time to do repair: 15 - 30 mins
Tools:
Customer: Raymond from Rochester, NY

Replacement of the dish racks due to corrosion

The top dish rack was not an exact replacement, the side shelf did not fit and the center spray did not fit. I ran into much more trouble removing the the top rack than I had thought. I used the old wheels and it finally went on but the other mentioned problems remained.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 10 people found this instruction helpful

Parts Used:
  • Upper Rack Assembly
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Lesley from Laguna Niguel, CA

Uppper dish rack with wheels

It was tricky to get the old rack off. Usually you can unclip the clips closest to the front wheels to pull the rack out. However, there is an area behind one of the wheels that you can kind of release and than pull the rack out. You then have to slide out the funnel/fan piece from the middle. That piece slides/ snaps in the middle of the the new rack. Then slide the new rack in place, re attach the release used to slide oldrack out.
That is it !!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 7 people found this instruction helpful

Parts Used:
  • Upper Rack Assembly
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jean from Mickleton, NJ

Replaced the upper dishwasher rack due to rusting.

To remove the upper rack, twist the support rail end caps toward the center of the machine and slightly downward. The caps will come off and you can slide the new rack into place. Reverse the process to replace the end caps. One of mine broke and I will need to order replacements.
The original rack is no longer available. The replacement, which is the only one GE offers, has less storage space and is not as sturdy. It bends downward when full. I am very disappointed and recommend not replacing the rack unless you have no other choice.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Eduardo J from San Angelo, TX

Rusted racks

Replaced lower rack with new. Upper rack removed front stoppers, removed old rack, slit new rack in and replaced stoppers. Total time about 15 mins.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Allan from Williston, VT

2 wheels on original track rusted/broke through

Removing the slide end caps was a little tricky. Key was to tilt and twist the end cap and slide out. Putting them back in was equally as tricky, but reversing the process helped. Sliding the new track in place was simple. Total repair took about 6 or 7 minutes.. Part was ordered on a Monday morning and delivered the following day using standard shipping. Outstanding service.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Upper Rack Assembly
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: James from Houston, TX

Removing the end caps on the tracks

I gently grasped the end caps with pliers and twisted them toward the center of the dishwasher while gently pulling on them. They came out with some minor difficulty. Be careful or they can be broken. When putting the caps back on the tracks grasp them with pliers to reinsert. Use a small srewdriver to assist in getting the plastic caps to slide into place. Wear light weight gloves when doing this to avoid getting cut on the sharp edges of the tracks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: karen from Corona, CA

Dishwasher rack corrosive

Very simple. First recieved Top rack. used a flat head screw
driver to remove cone/tower, put cone on new rack. put rack
on grove slided in easily. Took old rack out.replaced with new easily

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-7 of 7