Quick Question!

Have you ever purchased from PartSelect.com before?

257058-1-S-GE-WB9X244           -Oven Door Spring
257058-1-S-GE-WB9X244           -Oven Door Spring http://www.partselect.com/Schematics/GE/00012222i02.gif

Oven Door Spring

PartSelect Number PS257058

This door spring is sold individually. It is recommended if you are replacing one, to replace both.

This part works with the following brands: General Electric, Kenmore, Hotpoint.

This part works with the following products: Range.

Compare At

$36.47

You Save

$6.08

Your Price

$30.39
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Hinge with Roller - Right Side

Part Number 231612

This is a hinge with roller for the oven door on your range. The roller allows you to open and close the door with ease and control. If your door is not opening easily, you may need to replace this part. To make this repair you will need a Phillips screwdriver and a pair of pliers. Take note that this model is only for the right-hand side of your unit, to replace the left-hand side, see the related parts section. We recommend replacing both hinges at the same time.

$32.25
In Stock

Hinge with Roller - Left Side

Part Number 231611

This is known as a hinge with roller and it is for the oven door of your range. The hinge with roller allows you to easily open and close your oven door without much effort. Take note that your appliance requires two hinges, one located on each side of the door. We recommend changing both at the same time. This model is made for the left side of your unit, if you are looking to purchase one for the right side see the related parts section below.

$40.48
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 1 reviews What's this?
1-1 of 1
 

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: James from Westfield, NJ

Both hinges broke.

Real simple. Disengaged springs at the inside bottom, replaced hinges and reengaged springs.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1