Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William K - March 22, 2019
Verified Purchase
Fits well
Never had the door off and was worried but came off easily, part fits like a glove and door went on with no problem.
★★★★★
★★★★★
Stephen M - January 30, 2019
Verified Purchase
Should have thought of this earlier
Spent hours cleaning years of burned gunk off the bottom and realized I could probably buy it online. Glad I did. It looks so good in our quasi-clean oven. It slipped right in.
★★★★★
★★★★★
Roger B - January 22, 2019
Verified Purchase
Great refurbishment!
This gave our aged oven a new, fresh look. A former owner had evidently "cleaned" the oven with Al foil on the bottom, and it looked trashy. The new bottom was installed relatively easily and quickly. It is important to follow the instructions in the owner's manual, however, to avoid damaging the hinge and/or door. Also, due to sharp edges, be careful to avoid sliced fingers.
★★★★★
★★★★★
Gary C - February 9, 2018
Verified Purchase
Easy to replace, looks great
The part was packaged very well and arrived within a few days of ordering. Simple to replace and looks great!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The threy was rusty
The thry was rusty I took the door out And i slide out the thry it's take five minutes I did it by myself now my oven Look like a new I'm so happy now I get the part quickly thank you
simi from KEY WEST, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
False Bottoms in both ovens had aluminum pans melted on them and couldn't be cleaned
Use screwdriver to pull down tab on both hinges. Good hind on door and as you lower to full open door will come off. Pull old bottom, insert new bottom and put door back in slots. Close and then reopen to first position and push tabs back up to lock position
Raymond from MISSION VIEJO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Aluminum Foil Bonded With Bottom
It was much easier than trying to remove the bonded aluminum foil from the false bottom/drip pan. Simply lift and remove oven front door, (see your manual), slide out false bottom and slide in new. For me it did take longer than 15 minutes, but that's because I was doing a thorough oven cleaning. The part was in the $50 range and well wor
... Read moreth it. Why didn't anyone ever tell me that you can no longer line the bottom of your oven with aluminum foil?
Read less
Linda from Oro Valley, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
19 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Melted Plastic and use of water caused false bottom to be damaged badly
Oven door must be removed briefly while old false bottom is slid out and replaced with new one. Oven door is easily replaced and oven is like new.
Michael from Wildwood, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larry
November 2, 2017
Wife & i just ordered 2 of the "false bottom" panels for our two electric ovens which were damaged by using aluminum foil in them. An answered question on this site suggested that there is a way to quickly & easily remove the oven doors, and the secret to that is in the appliance manual. We did not install the ovens and we did not receive the fore-mentioned manual. What's the secret to removing the oven doors to replace the false bottoms?
For model number JT955SK4SS
Hi Larry,
Thank you for your inquiry. We have a video on YouTube that you can reference on how to remove the door from your oven. Here is the link for the video, https://www.youtube.com/watch?v=skpONuI6N7Q. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rich
February 11, 2020
Does the false bottom slide out or does it have screws holding it in?
For model number Js968sf4ss
Hello Rich, thank you for your question. The False Bottom should just slide out. I hope this helps.
Was this helpful?
Thank you for voting!
Francine
September 23, 2021
How wide is this false bottom?
Hello Francine, Thank you for the question. Going off the 1" Grid in the picture on the site, this False Bottom is approximately 24.5"X18". We hope this helps!
Was this helpful?
Thank you for voting!
Jerry
August 22, 2017
Do you sell the the whole door of the oven? If so what's the price
For model number PS968SP1SS
Hello Jerry, thank you for contacting us. The door is not sold as a whole unit. It is sold as individual pieces. Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
