Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS251866
This part works with the following brands: GE, Hotpoint & Kenmore.
First I removed the inner snap seal to expose the lower screw to the handle. Once the handle was removed the outer frame came off. I then installed the new frame and the handle and replaced the inner snap seal. Nothing to it.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Had already reverse engineered the door and it's parts so when the repair parts got here I already knew how the parts fit together. Took me 15 minutes max without instructions.
1) Opened the door and removed inner face frame. Removed the two screws for handle, slid out the end slid out the glass. Snapped the parts inplace re-installed the glass, screwed in new handle and done! Easy deal!
I searched in the website, I got the picture of the frame you had available for the Model and copied it in my computer. The frame had been placed on a graph paper. I counted the squares on the graph paper, measured the one I had and it was the same measurement. So, I ordered it. We were able to install it perfectly well. WOW! THis is a lot easier than going around town looking for one and not finding it!Thanks!!!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.