http://www.partselect.com/Schematics/GE/GE_Thumb/00109638i01.gif
See part 1800 in the diagram
http://www.partselect.com/Schematics/GE/GE_Thumb/00109638i01.gif

Door Assembly - Black

PartSelect Number PS251176

This part works with the following brands: GE, Hotpoint & Kenmore.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.3 / 5.0, 1 reviews What's this?
1-1 of 1
 

1 of 4 people found this instruction helpful

Parts Used

  • Door Assembly - Black

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set

CustomerRobert from Raleigh, NC

Front door assembly was cracked and needed to be replaced

1. Removed the bottom panel (7 screws) which gives access to the 2 bottom screws of the door assembly. 2. Removed the old door, partly by brute force since it was not easy to reach the 2 screws holding the upper portion of the door. 3. Removed the upper plastic bezel (2 screws). 4. Put new door on which required small hands and a socket wrench. 5. Some cleaning of the area and parts was required due to grease all around the pieces being handled. Otherwise, all is well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1