250748-1-S-GE-WB55T10065        -Inner Oven Door Glass with Frame
250748-1-S-GE-WB55T10065        -Inner Oven Door Glass with Frame 250748-2-S-GE-WB55T10065        -Inner Oven Door Glass with Frame

Inner Oven Door Glass with Frame

PartSelect Number PS250748

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $154.55
  • You Save

    $25.76
  • Your Price

    $128.79
In Stock
Order within the next 3 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 3 reviews What's this?
1-3 of 3
 

10 of 14 people found this instruction helpful

Parts Used

  • Inner Oven Door Glass with Frame

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerGail from Springfield VT

The inside glass part of the door cracked

When we received the part (it would have been nice to get instructions, but we figured it out anyways). Took four screws out of the door. Took some nuts off the door. Spread the door, took out the old (a little tricky) and slid in the new. Replaced the nuts and then the screws and it was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • Inner Oven Door Glass with Frame

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerWolcott from Pennington NJ

Oven door insulated glass broken

1) Remove the door from the oven.
2) Remove two screws from top oven face of door.
3) Flip door over
4) Remove 3 screws from bottom edge of door
5) Lift front door half from inside door half.
5) Remove 5 screws retaining the glass
6) Replace glass assembly and re-assemble door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers, Socket set

CustomerDanial from Winchester Ctr. CT

Cracked glass - oven door

Removed door , Removed bottom rail, removed glass (outer) Seperated sheetmetal sections by removing screws. replaced glass assembly clean all reused parts, reassembled in reverse order.. Installed door and heat tested oven .. simple, nice parts fit.. Thank You

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3