249581-1-S-GE-WB48T10011        -Oven Rack
249581-1-S-GE-WB48T10011        -Oven Rack 249581-2-S-GE-WB48T10011        -Oven Rack http://www.partselect.com/Schematics/GE/GE_Thumb/00121894i03.gif

Oven Rack

PartSelect Number PS249581

Sold individually.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $35.35
  • You Save

    $5.89
  • Your Price

    $29.46
In Stock
Order within the next 4 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 15 reviews What's this?
1-5 of 15
 

35 of 41 people found this instruction helpful

Parts Used

  • Oven Rack

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customerjamie from MORRISVILLE, PA

I needed new oven racks

My husband had turned the oven on to cook something and didn't know that I have a plastic tray in there. Well, needless to say I needed to get some new oven racks. I tried to get them through the manufacturer (GE). They were 68$ each. I thought that was a bit steep, so I looked online. I decided to order through PartsSelect. Well...they can 2 days later (the week before Christmas!!)and were a PERFECT fit.
Between the price, shipping speed and quality I will
definitely buy from again and recommend this site to everyone I know!!!!

Oh yeah, I work for Sears too. we have access to all sorts of parts....this site is the BEST for prices and delivery speed!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

25 of 28 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from Shapleigh, ME

Damaged oven door gasket

Very easy repair. The gasket ends are stuffed into slots right below the oven window and the gasket is held in with small wire clips that pop into holes in the door. Just pull the old gasket off, no tools. Install the gasket starting by stuffing one end into the slot mentioned above until the first clip lines up with the first small hole. Then insert each successive clip into the corresponding holes. Then use a slot screwdriver to stuff the other end of the gasket into the second slot. No sweat.

Help other customers find the most helpful instructions.

Were these instructions helpful?

17 of 18 people found this instruction helpful

Parts Used

  • Oven Rack

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerRobert from Apison, TN

Don't clean your oven with the racks still in, takes the finish off!!!!

Took old racks out, slid new ones in....exact match at a huge savings from what GE wanted per rack.
Found the company through a Google search, have it bookmarked and will be back if I need something from them.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

  • Oven Rack

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerMichael from Saint Louis, MO

Replaced racks

Yeah, so I didn't read the manual the first time we ran the self-clean cycle on the oven. Something about taking the racks out. So these were my little reminder to never do that again. The old racks came out; the new ones went in. Ten seconds. On to the next embarrassment...

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used

  • Oven Rack

Level of DifficultyA Bit Difficult

Time to do repair:Less than 15 mins

Tools

CustomerMicala from Tucson, AZ

Missing oven racks

When we moved into our new home I discovered that the oven that came with the home did not have any racks in it. I ordered these racks because they said they were compatible with Hotpoint ovens. However, when the racks arrived they were just a tad too wide to easily slide in the oven. With a bit of force my husband was able to shove the racks in. Luckily I don't cook enough to care if they are moved again because I don't think they'll come out easily.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 15