249411-1-S-GE-WB44X173          -Broil Element
249411-1-S-GE-WB44X173          -Broil Element 249411-2-S-GE-WB44X173          -Broil Element 249411-3-S-GE-WB44X173          -Broil Element

Broil Element

PartSelect Number PS249411

The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Little or no heat when broiling.
  • Cooktop element not heating.
  • Little or no heat when baking.
  • Oven not heating evenly.
  • Will not start.
  • Compare At

    $32.90
  • You Save

    $5.48
  • Your Price

    $27.42
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 43 reviews What's this?
31-43 of 43
 

0 of 1 people found this instruction helpful

Parts Used

  • Broil Element

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerGeorge from Lecanto, FL

Broiler element burned out.

The replacement was straightforward, six screws. Instructions were provided with the part along with the necessary screws to fit the new element terminals.
Open the breaker, verify power is off, remove the old burner. Install the new burner and mounting bracket. Restore power and test. In and out in less then thirty minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerRichard from Moore SC

Baking element was burned out.

Replaced both the baking element and the broiler element. The baking element was the only one burned out, but my wife insisted on replacing both since the oven was 20 years old. I cut the power to the oven by turning off the breaker first. I then used a nut driver to remove the two screws holding the baking element in, pulled out he element to get to the two wires attached & used the nut driver to remove the two screws holding the wires. Removed the old element & attached the wires to the new element, slid the element back into place & replaced the two screws, done! Did basically the same procedure to replace the broiler element, except I found that a striaight screwdriver worked better on the screws for it. Also, it helps to remove one screw from the support bracket for the broiler element & swing it out of the way. The only difficulty was having to work over the open oven door, however, it only took me about twenty minutes to replace both elements. Turned the breaker back on & oven works like a charm!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerJohn from Basking Ridge NJ

Both the baking and the broiling element had gone bad.

1. Found and turned off the breaker to the oven.
2. Removed the 2 screws holding the baking element in place.
3. Pulled the baking element out from its' mount.
4. Disconnected the electric leads to the baking element.
5. Connected the electric leads to the new baking element.
6. Replaced the new baking element in its' mount.
7. Replaced and tightened the 2 screws to hold the new baking element in place.
8. Repeated steps 2-7 for the broiling element.
9. Turned the breaker back on.
10. Successfully tested both elements.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Broil Element

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerStacy from Houston TX

Old broiler ekement burned out

The removal- replacement problem basically involves the shortness of the connector wires to the terminals. Because the burner is close to the top there is little room to use a screwdriver. The old unit used metal screws. The new came with open threaded holes in the terminals with two threaded screws. Used a small 1/4" ratchet which worked OK, but had to carefully bend the ends of the terminals to allow me to lower the element to an angle that would all room for ratchet action. (All design engineers should first have to work in maintenance before going to drawing board!)

S. Cooke, Houston Texas

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerBruce from Marietta GA

Bake element was showing a burn through spot and broil element was showing signs of wearing out

Cut the power off to the oven. Removed both of the racks in the oven. Removed the 2 screws that hold each element in place. Pulled the bake element out as far as it would go and unscrewed the two wires. Then did the same for the broil element. It has a guard to keep it from dropping down and I had to remove that. The broil element is a little more difficult to remove but i had read that in the previous users writeups. Overall it was a great experience from a price, delivery and installation process.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerBruce from Bowie MD

Burn out of baking element

During the self-cleaning cycle, the baking element started to arc and burn with heavy smoke and welding arc flashing. Turning the cleaning cycle off and unplugging the stove until new parts arrived.

Once I had the new parts, the replacement process was easy. Removal of the burned out baking element was easy due to that it fell apart in my hands. Thinking ahead and due to the age of the stove replacing the baking element just seem to be the smart thing to do. All elements are working now. Doing the job myself saved me lots of cash.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Broil Element

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerSusan D. from Holland MA

The broiler element had been broken for some time.

The stove was new when we moved into our new home but opted to leave "our" stove in the basement until the one that came with the house had seen it's better days. The removal of the original element required the use an allen type of driver - it's removal was simple and the new element popped-into place without a problem and I refastened with the screws that came with the new element. The part arrived from PartSelect right on time, in good condition, and I would definitely do business with PartSelect again when I need to! My only complaint has nothing to do with PartSelect, it is the angle one must assume to refasten the part into place! Thank you, and I'll be back!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Broil Element

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerWilliam from Kalama WA

Blown broiler element

Removed 3 screws from cover {center of back side of oven}, removed 2 screws from wires connected to element, then removed 2 screws mounting element
{inside oven}, pulled it & replaced it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Broil Element

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerWilliam from Chapel Hill NC

Replace broiler element

After an exhaustive search of local oven dealers and big box stores, I could not find a broiler element for my aged GE stove. I did find it online at Parts Select for about 1/3 the cost from GE online parts.

Replacement was easy-- just as described in posts for this part. The 'hardest' job was getting the screws started that hold the wires to the element-- small screws and small holes-- but just required some patience. A simple, inexpensive repair that avoided my having to replace the entire stove. Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Broil Element

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerGeorge from San Antonio TX

Element burnt out

removed old element rewired new element,turned back on power

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerTravis from Bullard TX

Broiler element seperated / infinity element switch bad

These two repairs were straight forward and the repair does not need elaboration. The amazing aspect of this repair was that I ordered my parts and received them on the second business day without any additional charges. That was really fast ! Thanks Partselect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerLana from Elgin OK

The broiler element burned out

First my husband removed the screws that held the element in place, pulled it partially out and then disconneted the wires. He located the part number that was stampted on the defective element and then I searched the internet for GE parts. I noted the price at GE site and continuted to search. The PartSelect price was about 1/2 of the GE price. We ordered the part, it arrived in two days, and we replaced it in less than 30 minutes. We were very pleased.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 13 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerMICHAEL from NEW WAVERLY TX

The timer was out. Decided to repair other parts due to the fact that the stove had not been used in 3 years.

First I removed the back of the stove. Then I removed the two screws that hold the top element. I then reached into the oven and removed the element. Replaced the element and screws. I then took the timer out by removing the two screws and unpluging four wires. I replaced the timer the same way I took it out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-43 of 43