Quick Question!

Have you ever purchased from PartSelect.com before?

249348-1-S-GE-WB44X10013        -Bake Element
249348-1-S-GE-WB44X10013        -Bake Element 249348-2-S-GE-WB44X10013        -Bake Element http://www.partselect.com/Schematics/GE/00000608i02.gif

Bake Element

PartSelect Number PS249348

This part works with the following brands: General Electric.

This part works with the following products: Range.

This part fixes the following symptoms:

  • Little to no heat when baking.

Compare At


You Save


Your Price

Order within the next 9 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews What's this?
1-1 of 1

1 of 1 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Brad from MORRILL, ME

Baking element was fried

Slide the stove out from its current location so that you can unplug the stove from the electrical outlet. Open the oven door and remove the oven racks so you have easy access to the rear interior of stove. With a small socket wrench or nut driver remove the screws from the shield which is attached to the rear of the stove. This also covers the access to the screws holding the baking element in place. Once the shield is removed, you can now remove the 2 screws holding the element in place. Once this is done, you should now be able to pull the element out far enough to reveal where the electrical wires are attached to the element. Next, loosen the screws for both wires so that you can detach them from the element. Remove the old baking element from the stove. Re attach the wires to the new element and insert back into its original place and re attach element to rear of stove with the screws that were removed or with new screws provided with the new part. Make sure the feet(holds element up off stove bottom) of the baking element are faced down before attaching wires. Once the element is in place, you can now secure the shield in place with the 4 screws previously removed. Place the oven racks back in, plug the power chord back into the outlet and slide stove back into its original place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1