Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS249109
Sold Individually. This knob accepts a D-shaped shaft.
This part works with the following brands: GE, Hotpoint & Kenmore.
The stove is over 20 years old, it was bound to happen. Because PartSelect.com has pictures of the part from three different views & detailed measurements, I was more confident that this part would be what I would need. When the part arrived in just 2-3 days, I opened the package, and slipped it into the socket... DONE ....Easy!!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Although my gas range is older, it is still in excellent condition and good working order, except for the knobs. I was down to one know which I moved around for all the burners. Found your site, instantly identified parts from your pictues & diagrams. Rec'd new knobs. Slid into position and away I went. It is like having a new stove. Knobs were a little pricey - but well worth it.
just pushed on the new control knob, no tools it was quick and eacy with the right part
Opened the package. Took out the knob. Put knob on spindle. The neat thing is it's an EXACT match! No bushings or adapters needed. No color difference; all the markings are identical. YAY!! I will be back, as all my appliances are aging sharply!
took off the old knob replace it with the new knob
Changed the knob. Just like that, it worked like a charm.
The new knob was the exact part. It slipped right on.
The repair in my situation is very easy and simple. Just push new control knob into the valve and it's done. I am pleased with my order and I received it sooner than I expected.
piece of cake - this asks for too much data - your parts supply rates high - I will use again for other stuff
I removed all the knobs and then pulled the stove out. I then unscrewed everything starting at the top of the stove and exposed the thermostat control. I followed the thermostat line and continued to remove screws and panels until it was completely exposed. I followed the line into the stove and removed the end of the thermostat. I then unscrewed the control and removed the item completely. Then I screwed the new thermostat control in place and proceeded to thread the line until I had it in its proper location in the oven. I then replaced all the parts, cleaning everything before I returned them into place.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.