Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/GE/00120444i01.gif
See part 6 in the diagram
http://www.partselect.com/Schematics/GE/00120444i01.gif

TRANSITION EXHAUST

PartSelect Number PS248007

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$164.15

You Save

$27.36

Your Price

$136.79
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.3 / 5.0, 1 reviews What's this?
1-1 of 1
 

1 of 2 people found this instruction helpful

Parts Used:
  • TRANSITION EXHAUST
  • CLAMP
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers
Customer: Donald from Friendswood, TX

Connect the exhaust and wiring to the cook top

The new cook top required more room below to accommodate the exhaust fan.

First I removed the cabinet shelf that was in the way, using a saw and hammer.

Second, I tried to locate the transition exhaust part but could not identify the part until I found Partselect.com on the net. They had the diagrams showing the parts and placing the order with them was a snap.

Third, the transition exhaust was taped in position with aluminum tape.

fourth, I connected the wiring, with the electricity shut off at the breaker panel, as indicated on the placard attached to the cook top.

Fifth, and most difficult was running the 6 inch diamater exhaust duct to the outside vent. The vent was buried in the far back corner of the cabinets. The duct I used is aluminum and extends out to 8 feet in length. The metal tape was used to connect it to the transition exhaust.

It was a straight forward job with no real problems other than working in close quarters.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1